GP1S58VJ000F Sharp

GP1S58VJ000F Gap : 5mm, Slit : 0.5mm GP1S58VJ000F Phototransistor Output, Case package Transmissive Photointerrupter Description Agency approvals/Compliance GP1S58VJ000F is a standard, phototransistor output, 1. Compliant with RoHS directive transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For Applications this family of devices, the emitter and detector are insert- 1. General purpose detection of object presence or mo- ed in a case, resulting in a through-hole design. tion. This device uses positioning pins to insure accurate 2. Example : Printer, FAX, Optical storage unit placement and avoid miss-orientation of the emitter and detector. Features 1. Transmissive with phototransistor output 2. Highlights : Vertical Slit for alternate motion detection Positioning Pin to prevent misalignment 3. Key Parameters : Gap Width : 5mm Slit Width (detector side): 0.5mm Package : 13.7105.2mm 4. RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of con rmation by device speci cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device speci cation sheets before using any SHARP device. Sheet No.: D3-A02702FEN 1 Date Sep. 1. 2006 SHARP Corporation0.7 C1 0.7 GP1S58VJ000F Internal Connection Diagram Top view 3 2 1 Anode 3 Collector 2 4 Cathode Emitter 4 1 Outline Dimensions (Unit : mm) Top view +0.3 13.7 0.3 +0.2 5.0 0.1 Model. No. SHARP mark A-A section B-B section 0.5 0.5 A B Date code (Both side) B +0.30 A 0.45 +0.3 0.10 0.4 0.1 (10.3) (2.54) 6.5 4 1 2 3 2.5 Unspeci ed tolerance shall be as follows Dimensions (d) Tolerance d6.0 0.1 6.0<d18.0 0.2 ( ) : Reference dimensions Product mass : approx. 0.5g Dip soldering material : Sn 3Ag 0.5Cu Sheet No.: D2-A02702FEN 2 MIN 10 3.5 2-0.7 10 2.0 7.5 (2.5) 5.2 (Detector center) 1.5 S58