PC3SD11NTZ Series V : 600V DRM PC3SD11NTZ Non-zero cross type DIP 6pin Series Phototriac Coupler for triggering Zero cross type is also available. (PC3SD21NTZ Series) Description Agency approvals/Compliance PC3SD11NTZ Series Phototriac Coupler include an 1. Recognized by UL1577 (Double protection isolation), infrared emitting diode (IRED) optically coupled to an file No. E64380 (as model No. 3SD11) output Phototriac. 2. Approved by CSA, file No. CA95323 (as model No. These devices feature full wave control and are 3SD11) () ideal isolated drivers for medium to high current Triacs. 3. Optionary available VDE Approved (DIN EN 60747- DIP package provides 5.0kV isolation from input to 5-2), file No. 40008189 (as model No. 3SD11) output with superior commutative noise immunity. 4. Package resin : UL flammability grade (94V-0) () DIN EN60747-5-2 : successor standard of DIN VDE0884. Up to Date codeR (December 2003), approval of DIN Features VDE0884. From Date codeS1 (January 2004), approval of DIN 1. High repetitive peak off-state voltage (V : 600V) DRM EN60747-5-2. () 2. Non-zero crossing functionality Reinforced insulation type is also available. (PC3SF11YVZ Series) 3. I ranks available (see Model Line-up section in this FT datasheet) 4. 6 pin DIP package Applications 5. Superior noise immunity (dV/dt : MIN. 1 000V/s) 1. Triggering for Triacs used to switch on and off 6. Lead-free components are also available (see Model devices which require AC Loads. Line-up section in this datasheet) For example heaters, fans, motors, solenoids, and 7. Double transfer mold construction (Ideal for Flow valves. Soldering) 2. Triggering for Triacs used for implementing phase 9. High isolation voltage between input and output control in applications such as lighting control and (V (rms) : 5.0kV) iso temperature control (HVAC). 3. AC line control in power supply applications. Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: D2-A07501EN 1 Date Mar. 31. 2004 SHARP CorporationPC3SD11NTZ Series Internal Connection Diagram 1 Anode 1 6 2 Cathode 3 NC 2 5 4 Anode/Cathode 5 No external connection 3 4 6 Cathode/Anode (Unit : mm) Outline Dimensions 1. Through-Hole ex. PC3SD11NTZ 2. Wide Through-Hole Lead-Form ex. PC3SD11NVZ 0.3 0.3 1.2 1.2 0.2 0.6 0.2 0.6 6 5 4 Model No. Model No. 6 5 4 SHARP SHARP mark Rank mark mark Rank mark 3SD11 3SD11 Anode Anode mark mark Date code (2 digit) Date code (2 digit) 1 2 3 Factory identification mark 1 3 2 Factory identification mark 0.3 0.5 0.5 0.3 7.12 7.62 7.12 7.62 Epoxy resin Epoxy resin 0.1 0.1 0.26 0.5 0.25 0.5 0.25 2.54 10.16 2.54 0.1 0.5 : 0 to 13 Product mass : approx. 0.35g Product mass : approx. 0.35g 3. SMT Gullwing Lead-Form ex. PC3SD11NXP 4. Wide SMT Gullwing Lead-Form ex. PC3SD11NWP 0.3 0.2 1.2 0.6 0.2 0.3 0.6 1.2 6 5 4 Model No. 6 5 4 Model No. SHARP SHARP mark mark Rank mark Rank mark 3SD11 3SD11 Anode Anode mark mark Date code (2 digit) Date code (2 digit) 1 2 3 1 2 3 Factory identification mark Factory identification mark 0.5 0.3 0.5 7.12 7.62 7.12 0.3 7.62 Epoxy resin 0.25 0.25 2.54 Epoxy resin +0.4 +0.4 2.54 1.0 1.00 0 +0 10.0 0.5 0.25 0.5 0.25 0.75 10.16 0.75 MAX. 12.0 Product mass : approx. 0.33g Product mass : approx. 0.34g Sheet No.: D2-A07501EN 2 0.5 2.9 0.5 0.5 6.5 3.5 0.5 0.5 3.5 6.5 TYP. 0.5 0.1 3.25 0.5 0.26 0.25 0.35 0.5 2.9 0.5 0.5 0.5 0.5 3.5 6.5 3.5 3.25 0.5 0.1 6.5 TYP. 0.26 0.5 MIN. 2.7 0.25 0.25