PC847XJ0000F Sharp

PC847XJ0000F Series DIP 16pin (4-channel) PC847XJ0000F General Purpose Photocoupler Series 1-channel package type is also available. (model No. PC817XJ0000F Series) Description Agency approvals/Compliance PC847XJ0000F Series contains an IRED optically 1. Recognized by UL1577 (Double protection isolation), coupled to a phototransistor. file No. E64380 (as model No. PC817) It is packaged in a 4-channel package, available in 2. Package resin : UL flammability grade (94V-0) SMT gullwing lead-form option. Input-output isolation voltage(rms) is 5.0kV. Applications Collector-emitter voltage is 80V and CTR is 50% to 1. I/O isolation for MCUs (Micro Controller Units) 600% at input current of 5mA. 2. Noise suppression in switching circuits 3. Signal transmission between circuits of different po- Features tentials and impedances 1. 16pin DIP 4-channnel package 2. Double transfer mold package (ldeal for Flow Solder- ing) 3. High collector-emitter voltage (V : 80V) CEO 4. Current transfer ratio (CTR : MIN. 50% at I =5mA, F V =5V) CE 5. Several CTR ranks available 6. High isolation voltage between input and output (V : 5.0kV) iso(rms) 7. Lead-free and RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: D2-A03202EN 1 Date Jun. 30. 2005 SHARP CorporationPC847XJ0000F Series Internal Connection Diagram 16 15 14 13 12 11 10 9 1 3 5 7 Anode 2 4 6 8 Cathode 9 11 13 15 Emitter 10 12 14 16 Collector 1 2 3 4 5 6 7 8 Outline Dimensions (Unit : mm) 1. Through-Hole ex. PC847XJ0000F 0.3 1.2 0.2 0.6 16 15 14 13 12 11 10 9 123 4 5 6 7 8 0.25 2.54 0.5 0.3 19.82 7.62 Epoxy resin 0.1 0.5 : 0 to 13 Product mass : approx. 1.0g 2. SMT Gullwing Lead-Form ex. PC847XIJ000F 0.3 1.2 0.2 0.6 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 0.25 2.54 0.5 19.82 0.3 7.62 Epoxy resin +0.4 +0.4 1.0 1.0 0 0 +0 10.00.5 Product mass : approx. 0.9g Plating material : SnCu (Cu : TYP. 2%) Sheet No.: D2-A03202EN 2 Factory identification Anode mark Factory identification mark Anode mark mark Date code Date code 0.5 2.7 PC817 PC817 PC817 PC817 PC817 PC817 PC817 PC817 0.5 0.5 0.5 0.5 6.5 0.5 3.5 3.0 3.5 6.5 TYP. 0.5 0.1 0.26 0.25 0.35