R2.4 Under development New product PQ033ES1MXP Low Power-Loss Voltage Regulator PQ050ES1MXP Low Output Current, Compact Surface Mount Type Low Power-Loss Voltage Regulators Outline Dimensions (Unit: mm) Features 4.2(MAX) (1) Compact package : TO-92 type 5.2(MAX) 1.40.1 (Size(mold part) 5.2 5.5 4.2 mm) (2) Small current output : 100 mA(MAX.) (3) Low consumption current : Quiescent current Iq=MAX. 350 A (4) Low power-loss : Dropout voltage : MAX. 0.26 V at Io=60 mA 0.6(MAX) Dropout voltage : MAX. 0.4 V at Io=150 mA (5) Built-in overcurrent, overheat protection functions 0.40.05 0.450.1 (6) Taped package 1 3 2 0.4 0.4 2.5 2.5 0.1 0.1 Applications (1) TV (2) VCR (3) Air conditioner (4) DVD player (5) Audio equipment Internal connection 3 1 DC output(Vo) 1 Control GND 2 circuit DC input(Vin) 3 2 Absolute Maximum Ratings (Ta=25C) Parameter Symbol Ratings Unit *1 Input voltage Vin 16 V Output current Io 150 mA *1 All are open except GND *2 Power dissipation Pd 520 mW and applicable terminals. *3 Junction temperature Tj 150 C *2 At mounted condition *3 Overheat protection may operate Operating temperature Topr -30 to +80 C at 125Tj150C. Storage temperature Tstg -55 to +150 C Soldering temperature Tsol 260(For 10s) C (Notice) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Specifications are subject to change without notice for improvement. (Internet) Data for Sharp s optoelectronic/power devices is provided on internet. (Address PQ033ES1MXP Low Power-Loss Voltage Regulator PQ050ES1MXP Electrical Characteristics (Unless otherwise specified, Vin=Vo(TYP.)+1.0V, Io=30mA.Ta=25C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Output voltage Vo - Refer to the table below. V RegL1 Io=5mA to 60mA - 10 50 mV Load regulation RegL2 Io=5mA to 100mA - 20 100 mV RegL3 Io=5mA to 150mA - 30 160 mV Vin=Vo(TYP.)+1V to Line regulation RegI - 3.0 20 mV Vo(TYP.)+6V Temperature coefficient of output voltage TcVo Io=10mA, Tj=-25 to +75C - 0.05 - mV/C Ripple rejection RR - - 55 - dB Vi-o1 Io=60mA, Vin=*4 - 0.11 0.26 V Dropout voltage Vi-o2 Io=150mA, Vin=*4 - 0.2 0.4 V Quiescent current Iq Io=0mA - 170 350 A *4 Dropout voltage when output voltage lowers 0.1V from the voltage at Vin=Vo+1V. Output Voltage Line-up (Vin=Vo(TYP.)+1.0V, Io=30mA.Ta=25C) Parameter Symbol Conditions MIN. TYP. MAX. Unit PQ033ES1MXP 3.234 3.3 3.366 Output voltage V O V PQ050ES1MXP 4.900 5.0 5.100 As of September 2002 2/2 D5-020902