Preface, Contents 1 Getting started with LOGO 2 LOGO installation and wiring 3 Programming LOGO 4 LOGO functions 5 Configuring LOGO LOGO program module (card) 6 LOGO Software 7 LOGO Applications 8 A Technical data Manual B Determining the cycle time C LOGO without display D LOGO menu structure E Order numbers This manual has F the order number: Abbreviations 6ED1050-1AA00-0BE6 Index Edition 02/2005 A5E00380835-01SafetyGuidelines This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol notices referring to property damage only have no safety alert symbol. The notices shown below are graded according to the degree of danger. Danger indicates that death or severe personal injury will result if proper precautions are not taken. Warning indicates that death or severe personal injury may result if proper precautions are not taken. Caution with a safety alert symbol indicates that minor personal injury can result if proper precautions are not taken. Caution without a safety alert symbol indicates that property damage can result if proper precautions are not taken. Attention indicates that an unintended result or situation can occur if the corresponding notice is not taken into account. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. QualifiedPersonnel The device/system may only be set up and used in conjunction with this documentation. Commissioning and operation of a device/system may only be performed by qualified personnel. Within the context of the safety notices in this documentation qualified persons are defined as persons who are authorized to commission, ground and label devices, systems and circuits in accordance with established safety practices and standards. PrescribedUsage Note the following: Warning This device and its components may only be used for the applications described in the catalog or the technical description, and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly as well as careful operation and maintenance. Trademarks All names identified by are registered trademarks of the Siemens AG. The remaining trademarks in this publica- tion may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. DisclaimerofLiability CopyrightSiemensAG2004Allrightsreserved The distribution and duplication of this document or the We have reviewed the contents of this publication to ensure utilization and transmission of its contents are not consistency with the hardware and software described. Since permitted without express written permission. Offenders variance cannot be precluded entirely, we cannot guarantee will be liable for damages. All rights, including rights completeconsistency.However,theinformationinthispublica- created by patent grant or registration of a utility model tion is reviewed regularly and any necessary corrections are or design, are reserved included in subsequent editions. Siemens AG Automation and Drives Siemens AG 2004 Postfach 4848, D-90327 Nuernberg Technical data subject to change. Siemens Aktiengesellschaft A5E00380835-01