ZM5304 Z-Wave Serial Interface Module with Antenna KEY BENEFITS The ZM5304 serial interface Easy integration Complete design from interface to module with antenna takes antenna An off-the-shelf solution the RF design effort out TARGET APPLICATIONS of Z-Wave. Designed for Gateways easy integration and fast TVs Set-top boxes time-to-market, it is ideal KEY FEATURES in applications such as TVs, set-top boxes, and Provides connection via Z-Wave serial API interface gateways. UART, USB full-speed device connection Firmware upgrade using UART or USB Helical antenna on-board The ZM5304 is a fully self-contained module that includes a Z-Wave modem Hardware AES 128 security engine and built-in antenna. The module comes with full FCC modular approval and is 2A sleep mode 9.6/40/100 kbit/s data rates pre-scanned for CE approval, making hardware intergration and approval very Regional modules for 868/908/921 MHz simple. The ZM5304 provides hardware-assisted frequency agility, enabling Hardware-assisted frequency agility with the module to switch away from a noisy channel without communication or up to 3 channels software overhead. Battery monitor and built-in supply regulators Power supply: 2.3-3.6V The ZM5304 module exposes the well-documented and proven Z-Wave PCB module 27mm x 15.2mm x 5.5mm Serial API via USB or UART. As new Serial API features become available, the ZM5304 firmware can be upgraded using the UART or USB ports, eliminating the need to replace hardware. Existing products that use the Z-Wave Serial API can be upgraded to the ZM5304 module without having to re-write their interface software. ACTUAL SIZE 27mm x 15.2mm The ZM5304 continues to build on the Z-Wave ten-year track record of backward-compatibility, enabling all generations of Z-Wave to communicate seamlessly in a Z-Wave network. POWERING THE NEW DIGITAL HOME: SET-TOP BOXES CONSUMER AV NETWORKS HOME CONTROL COMMERCIAL ELECTRONICS SYSTEMS This datasheet has been downloaded from ZM5304 Z-Wave Serial Interface Module with Antenna MODULE COMPARISON TABLE Feature ZM3102 ZM5202 ZM5101 ZM5304 Application General Purpose General Purpose Serial Interface Modem Only PCB Module PCB Module SiP w/o Type PCB Module w/ Ant. & w/ SAW Filter SAW Filter SAW Filter Based on SD3301 SD3502 Die SD3503 PCB Module PCB Module QFN56 PCB Module Package 13x14mm 13x14mm 8x8mm 13x30mm Frequency (MHz) 868/908/921 868/908/921 868/908/921 868/908/921 Bit-rate (kkbit/s) 9.6/40 9.6/40/100 9.6/40/100 9.6/40/100 FLASH Memory (kB) 32 128 128 N/A SRAM (kB) 2 16 16 N/A I/O 10 10 30 N/A Key-Scan ( Keys) None None 128 N/A IR Support None None Transmit/Learn N/A UART/SPI 1/1 1/1 2/2 1/- USB 2.0 Device None None 1 1 Security 128-bit AES Yes SW Only Yes HW Yes HW Yes HW Tx RF Power (dBm) -22 to -2 -26 to +4 -24 to +6 -26 to +4 Rx Sensitivity (dBm) -102 9.6kbit/s -103 9.6kbit/s -105 9.6kbit/s -103 9.6kbit/s Tx/Rx Current (mA) 36( -2dBm) /23 41( 0dBm) /32 32( 0dBm) /32 36( 0dBm) /33 Sleep Current (A) 2.5 1 1 2 Battery to Battery (A) 80 50 50 N/A ABOUT SIGMA DESIGNS FOR REGIONAL SALES OFFICES AND DISTRIBUTOR CONTACT INFORMATION Sigma Designs is a leading provider of system-on-chip (SoC) solutions used to deliver entertainment and control throughout the home: Visit: go-z-wave.sigmadesigns.com Media Processing, Smart TV, Video Encoding, Home AV Networking, Video Processing, Home Control Headquarters 47467 Fremont Blvd. These SoCs are supported with board-level reference designs, sophisticated system software, and technical Fremont, CA 94538 USA documentation to form a complete solution for a variety of set-top boxes, smart TVs, consumer electronics, AV network Main: +1.510.897.0200 devices, and home control systems. z-wave.sigmadesigns.com Features subject to change without notice. Sigma Designs, HiDTV, Z-Wave, and the Sigma Designs logo are either registered trademarks or trademarks of Sigma Designs, Inc. and its subsidiaries in the United States and other countries. All other trademarks or registered trademarks are the property of their respective owners. These devices incorporate copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Devices that incorporate Rovi Corporations Anti-Copy Process (ACP) technology may only be sold to Rovi Authorized Buyers. Copyright 2015 Sigma Designs, Inc. All rights reserved. Rev. 07.16.14 PMB12441