SLG59M1460V Silego

SLG59M1460V SLG59M1460V 30 m, 2.0 A Nanopower Mobile Integrated Power Switch with Discharge General Description Pin Configuration The SLG59M1460V is a 30 m 2.0 A single-channel load switch that is able to switch 0.85 to 3.3 V power rails. The product is packaged in an ultra-small 1.0 x 1.6 mm package. 1 8 VDD GND Features 2 7 ON NC 1.0 x 1.6 x 0.55 mm STDFN 8L package (2 fused pins for 6 D 3 drain and 2 fused pins for source) S Logic level ON pin capable of supporting 0.85 V CMOS 5 D 4 S Logic Discharged Load when off Fast Turn On time 8-pin STDFN Low RDS while supporting 2.0 A ON (Top View) Pb-Free / Halogen-Free / RoHS compliant Operating Temperature: -20 C to 70C Operating Voltage: 2.5 V to 5.25 V Applications Watch Power Rail Switching Tablet Power Rail Switching Smartphone Power Rail Switching Block Diagram 2.0 A 30 m D S VDD +2.5 V to 5.25 V Input Circuit ON Silego Technology, Inc. Rev 1.01 000-0059M1460-101 Revised November 5, 2015 SLG59M1460V Pin Description Pin Pin Name Type Pin Description 1 VDD PWR VDD power for load switch control (2.5 V to 5.25 V) Turns MOSFET ON (4 M pull down resistor) 2 ON Input CMOS input with VIL < 0.3 V, VIH > 0.85 V 3 D MOSFET Drain of Power MOSFET (fused with pin 4) 4 D MOSFET Drain of Power MOSFET (fused with pin 3) 5 S MOSFET Source of Power MOSFET (fused with pin 6) 6 S MOSFET Source of Power MOSFET (fused with pin 5) 7 NC NC No Connect. Must leave this pin floating. Do not connect to VDD or GND 8 GND GND Ground Ordering Information Part Number Type Production Flow SLG59M1460V STDFN 8L Commercial, -20 C to 70 C SLG59M1460VTR STDFN 8L (Tape and Reel) Commercial, -20 C to 70 C SLG59M1460V RDS ON Typical RDS(ON) 50.0 45.0 40.0 TA = 25C TA = 70C 35.0 30.0 25.0 20.0 15.0 1.2 1.7 2.2 2.7 3.2 VDD-VD (V) 000-0059M1460-101 Page 2 of 8 RDS(ON) (mohm)