Si534 REVISION D QUAD FREQUENCY CRYSTAL OSCILLATOR (XO) (10 MHZ TO 1.4 GHZ) Features Si5602 Available with any-rate output Internal fixed crystal frequency frequencies from 10 MHz to 945 MHz ensures high reliability and low and select frequencies to 1.4 GHz aging Four selectable output frequencies Available CMOS, LVPECL, LVDS, and CML outputs 3rd generation DSPLL with superior 3.3, 2.5, and 1.8 V supply options jitter performance Industry-standard 5 x 7 mm 3x better frequency stability than package and pinout SAW-based oscillators Pb-free/RoHS-compliant Ordering Information: Applications See page 7. SONET/SDH Test and measurement Networking Clock and data recovery Pin Assignments: SD/HD video FPGA/ASIC clock generation See page 6. Description (Top View) The Si534 quad frequency XO utilizes Silicon Laboratories advanced FS 1 DSPLL circuitry to provide a low jitter clock at high frequencies. The Si534 7 is available with any-rate output frequency from 10 to 945 MHz and select 1 6 V frequencies to 1400 MHz. Unlike a traditional XO where a different crystal is NC DD required for each output frequency, the Si534 uses one fixed crystal to provide a wide range of output frequencies. This IC based approach allows OE 2 5 CLK the crystal resonator to provide exceptional frequency stability and reliability. In addition, DSPLL clock synthesis provides superior supply noise rejection, GND 3 4 CLK+ simplifying the task of generating low jitter clocks in noisy environments 8 typically found in communication systems. The Si534 IC-based XO is factory configurable for a wide variety of user specifications including frequency, FS 0 supply voltage, output format, and temperature stability. Specific (LVDS/LVPECL/CML) configurations are factory programmed at time of shipment, thereby eliminating long lead times associated with custom oscillators. FS 1 Functional Block Diagram 7 1 6 V NC DD V CLK CLK+ DD OE 2 5 NC GND 3 4 CLK Any-rate 8 Fixed 101400 MHz FS 1 Frequency FS 0 DSPLL FS 0 XO Clock (CMOS) Synthesis OE GND Rev. 1.1 6/07 Copyright 2007 by Silicon Laboratories Si534Si534 1. Electrical Specifications Table 1. Recommended Operating Conditions Parameter Symbol Test Condition Min Typ Max Units 1 V 3.3 V option 2.97 3.3 3.63 Supply Voltage DD 2.5 V option 2.25 2.5 2.75 V 1.8 V option 1.71 1.8 1.89 Supply Current I Output enabled DD LVPECL 121 111 CML 99 108 mA 90 LVDS 98 81 CMOS 88 Tristate mode 60 75 Output Enable (OE) V 0.75 x V IH DD 2 V and Frequency Select FS 1:0 V 0.5 IL Operating Temperature Range T 40 85 C A Notes: 1. Selectable parameter specified by part number. See Section 3.Ordering Informatio on page 7 for further details. 2. OE and FS 1:0 pins include a 17 k pullup resistor to V . DD Table 2. CLK Output Frequency Characteristics Parameter Symbol Test Condition Min Typ Max Units 1,2 f LVPECL/LVDS/CML 10 945 Nominal Frequency O MHz CMOS 10 160 Initial Accuracy Measured at +25 C at time of f 1.5 ppm i shipping 7 +7 1,3 Temperature Stability 20 +20 ppm 50 +50 Frequency drift over first year 3 ppm Aging f a Frequency drift over 15 year life 10 ppm Temp stability = 7 ppm 20 ppm Total Stability Temp stability = 20 ppm 31.5 ppm Temp stability = 50 ppm 61.5 ppm Notes: 1. See Section 3.Ordering Informatio on page 7 for further details. 2. Specified at time of order by part number. Also available in frequencies from 970 to 1134 MHz and 1213 to 1417 MHz. 3. Selectable parameter specified by part number. 4. Time from powerup or tristate mode to f . O 2 Rev. 1.1