Ultra Series Crystal Oscillator Si564 Data Sheet Ultra Low Jitter I2C Programmable XO (90 fs), 0.2 to 3000 KEY FEATURES MHz I2C programmable to any frequency from 0.2 to th The Si564 Ultra Series oscillator utilizes Skyworks Solutions advanced 4 3000 MHz with < 1 ppb resolution generation DSPLL technology to provide an ultra-low jitter, low phase noise Ultra low jitter: 90 fs RMS Typ (12 kHz 20 clock at any output frequency. The device is user-programmed via simple I2C MHz) commands to provide any frequency from 0.2 to 3000 MHz with <1 ppb resolution Configure up to 4 pin-selectable startup and maintains exceptionally low jitter for both integer and fractional frequencies frequencies across its operating range. The Si564 offers excellent reliability and frequency I2C interface supports 100 kbps, 400 kbps, and stability as well as guaranteed aging performance. On-chip power supply filtering 1 Mbps (Fast Mode Plus) provides industry-leading power supply noise rejection, simplifying the task of Excellent PSNR and supply noise immunity: generating low jitter clocks in noisy systems that use switched-mode power sup- 80 dBc Typ plies. The Si564 has a dramatically simplified supply chain that enables Skyworks 3.3 V, 2.5 V, and 1.8 V V supply operation DD to ship custom frequency samples 1-2 weeks after receipt of order. Unlike a from the same part number traditional XO, where a different crystal is required for each output frequency, the LVPECL, LVDS, CML, HCSL, CMOS, and Dual Si564 uses one simple crystal and a DSPLL IC-based approach to provide the CMOS output options desired output frequency. The Si564 is factory-configurable for a wide variety of 2.5x3.2, 3.2x5, 5x7 mm package options user specifications, including startup frequency, I2C address, output format, and OE pin location/polarity. Specific configurations are factory-programmed at time Samples available with 1-2 week lead times of shipment, eliminating the long lead times associated with custom oscillators. APPLICATIONS Pin Assignments SDA 100G/200G/400G OTN, coherent optics, PAM4 7 10G/40G/100G optical ethernet OE/FS/NC 1 6 VDD 3G-SDI/12G-SDI/24G-SDI broadcast video NC/OE/FS 2 5 CLK Servers, switches, storage, search acceleration Test and measurement GND 3 4 CLK+ 8 FPGA/ASIC clocking 5 x 7 mm and 3.2 x 5 mm 2.5 x 3.2 mm SCL (Top View) Fixed Frequency Frequency Flexible Pin Descriptions Low Crystal DSPLL Noise Driver DCO 1, 2 Selectable via ordering option Digital Digital OSC Phase Error Phase Loop OE = Output enable FS = Frequency Select NC = No connect Cancellation Detector Filter Flexible Phase Error Formats, 3 GND = Ground 1.8V 3.3V Fractional Operation Divider NVM 4 CLK+ = Clock output Control Power Supply Regulation 5 CLK- = Complementary clock output. Not used for CMOS. OE, Frequency Select Built-in Power Supply (I2C and Pin Control) Noise Rejection 6 VDD = Power supply 7 SDA = I2C Serial Data 8 SCL = I2C Serial Clock Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 1 Rev. 1.3 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice December 3, 2021 1Si564 Data Sheet Ordering Guide 1. Ordering Guide The Si564 XO supports a variety of options including startup frequency, output format, and OE pin location/polarity, as shown in the chart below. Specific device configurations are programmed into the part at time of shipment, and samples are available in 1-2 weeks. Skyworks Solutions provides an online part number configuration utility to simplify this process. Refer to