AN354 AB0 PROTOTYPING BOARD USERS GUIDE 1. Summary The AB0 prototype board provides access to all MCU I/O signals through use of a 96pin connector, which mates directly with other target boards featuring a 96pin expansion connector. The 96pin plug connector is manufactured by Tyco Electronics Amp, part number 650947-5 Digi-Key part number A1279-ND. The corresponding socket connector is also manufactured by Tyco Electronics Amp, part number 5650461-5, Digi-Key part number A32863-ND. 2. Features 96-pin 3 row connector 0.1 center through-hole access to connector pins Two sets of high and low rails for digital and analog supply and ground An array of individual through-holes 3. Hardware Setup A compatible target board is connected to the accessory board as shown in Figure 1. HIGH1 P1 A B C HIGH2 Target Board LOW1 LOW2 Figure 1. Hardware Setup Rev. 0.1 9/08 Copyright 2008 by Silicon Laboratories AN354 AB0 PROTO BD SILICON LABSSimplicity Studio One-click access to MCU and wireless tools, documentation, software, source code libraries & more. Available for Windows, Mac and Linux IoT Portfolio SW/HW Quality Support and Community www.silabs.com/IoT www.silabs.com/simplicity www.silabs.com/quality community.silabs.com Disclaimer Silicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, andTypica parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. Silicon Labs shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any Life Support System without the specific written consent of Silicon Labs. ALife Support Syste is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons. Trademark Information Silicon Laboratories Inc. , Silicon Laboratories, Silicon Labs, SiLabs and the Silicon Labs logo, Bluegiga, Bluegiga Logo, Clockbuilder, CMEMS, DSPLL, EFM, EFM32, EFR, Ember, Energy Micro, Energy Micro logo and combinations thereof,the worlds most energy friendly microcontroller, Ember, EZLink, EZRadio, EZRadioPRO, Gecko, ISOmodem, Precision32, ProSLIC, Simplicity Studio, SiPHY, Telegesis, the Telegesis Logo, USBXpress and others are trademarks or registered trademarks of Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders. Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 USA