C8051F500DK Silicon Labs

C8051F50x/51x C8051F500 DEVELOPMENT KIT USERS GUIDE 1. Relevant Devices The C8051F500 Development Kit is intended as a development platform for the microcontrollers in the C8051F50x/51x MCU family. The target board included in this kit is provided with a presoldered C8051F500 MCU (LQFP48 package) and a C8051F502 (QFN32 package). Code developed on the C8051F500 can be easily ported to the other members of this MCU family. Refer to the C8051F50x/51x data sheet for the differences between the members of this MCU family. 2. Kit Contents The C8051F500 Development Kit contains the following items: C8051F500 Target Board C8051Fxxx Development Kit Quick-Start Guide AC to DC Power Adapter USB Debug Adapter (USB to Debug Interface) Two USB Cables 3. Hardware Setup Using a USB Debug Adapter The target board is connected to a PC running the Silicon Laboratories IDE via the USB Debug Adapter as shown in Figure 1. 1. Connect the USB Debug Adapter to one of the DEBUG connector on the target board (DEBUG A or DEBUG B) with the 10-pin ribbon cable. The recommended connection is to DEBUG A as this microcon- troller is the primary MCU on the board and more peripherals are easily available. 2. Connect one end of the USB cable to the USB connector on the USB Debug Adapter. 3. Connect the other end of the USB cable to a USB Port on the PC. 4. Connect the AC/DC power adapter to power jack P4 on the target board. Target Board PC AC/DC Adapter USB Cable USB Debug Adapter Figure 1. Hardware Setup using a USB Debug Adapter Rev. 0.2 11/14 Copyright 2014 by Silicon Laboratories C8051F50x/51x Port 0 A P1 P1 SIDE B U5 R27 COMM DS4 J1 J8 J14 J20 J26 Port 0 B Port 4 A SIDE A J22 C8051 J27 J5 P1.3 A J17 F500 J31 DS2 U2 Port 3 A Port 1 B J32 U1 P1.4 A F502 J24 J19 J4 J28 J18 J11 Port 2 A Port 2 B J10 J9 P1.4 B P1.3 B SILICON LABS www.silabs.com DS1 RESET A J7 J3 PWR J21 J29 DS3 C8051F500-TB Port 1 A DEBUG A DEBUG B RESET B P4 J2 TB3 P2 P3 Silicon Laboratories USB DEBUG ADAPTER Run Stop Power +LIN V LIN OUT GND CAN H CAN L GNDC8051F50x/51x Notes: 1. Use the Reset button in the IDE to reset the target when connected using a USB Debug Adapter. 2. Remove power from the target board and the USB Debug Adapter before connecting or disconnecting the ribbon cable from the target board. Connecting or disconnecting the cable when the devices have power can damage the device and/ or the USB Debug Adapter. 4. Software Setup Simplicity Studio greatly reduces development time and complexity with Silicon Labs EFM32 and 8051 MCU products by providing a high-powered IDE, tools for hardware configuration, and links to helpful resources, all in one place. Once Simplicity Studio is installed, the application itself can be used to install additional software and documentation components to aid in the development and evaluation process. Figure 2. Simplicity Studio The following Simplicity Studio components are required for the C8051F500 Development Kit: 8051 Products Part Support Simplicity Developer Platform Download and install Simplicity Studio from www.silabs.com/8bit-software or www.silabs.com/simplicity-studio. Once installed, run Simplicity Studio by selecting Start Silicon LabsSimplicity Studio Simplicity Studio from the start menu or clicking the Simplicity Studio shortcut on the desktop. Follow the instructions to install the software and click Simplicity IDE to launch the IDE. The first time the project creation wizard runs, the Setup Environment wizard will guide the user through the process of configuring the build tools and SDK selection. 2 Rev. 0.2