UG252: Lighting Reference Design Demo Board Kit User s Guide (RD-0035-0601, RD-0085-0401, RD-0098-0401) Silicon Labs compact and cost-effective lighting reference design is based on the Zig- bee 3.0 standard and can be used in conjunction with a Zigbee 3.0 home automation KEY POINTS system. This reference design kit features Silicon Labs EM3585 (RD-0035-0601), EFR32MG1P732F256GM32 (RD-0085-0401) or EFR32MG12P432F1024GM32 Quick-start demonstration (RD-0098-0401) Wireless Microcontroller (MCU). Recommended next steps Kit overview This document contains instructions and guidelines for the following: a quick-start dem- onstration and next steps, system overview and operations, hardware, firmware and Device operation ecosystem considerations, and engineering and manufacturing testing. This guide ap- Hardware and firmware considerations plies to EmberZNet PRO 6.0 and later. Ecosystem considerations Engineering and manufacturing testing The reference design comes preprogrammed with the Zigbee Z3ColorControlLight sample application and is fully functional out of the box. All hardware design files are available within Simplicity Studio, Zigbee firmware application source code is available within the EmberZNet PRO stack, and Thread firmware application source is available within the Thread stack. Access to Zigbee and Thread stacks is available after pur- chasing and registering a wireless starter kit such as the SLWSTK6000B. Additional in- formation about acquiring a wireless starter kit is available: UG252: Lighting Reference Design Demo Board Kit User s Guide (RD-0035-0601, RD-0085-0401, RD-0098-0401) Introduction 1. Introduction The Silicon Labs Zigbee Lighting Reference Design modules and demonstration boards are designed to demonstrate Zigbee lighting applications with EFR32MG or EM3585 Zigbee chipsets. The modules are preprogrammed for anout of the bo demonstration using the demonstration board shown in the figure below. The modules can also be directly integrated into a connected lighting application as described in 6.3 Module Hardware Integration Guidelines. An example of such an application is shown in the figure below. Hardware design files and firmware application source code are available for all items in the kit. This document will address quickstart for demonstration and next steps, system overview and operation, hardware and firmware con- siderations, ecosystem considerations, and engineering and manufacturing test. Figure 1.1. Lighting Reference Design module and demonstration board Figure 1.2. Connected Lighting Application Example silabs.com Building a more connected world. Rev. 0.4 2