RS9113 n-Link Module Family PRODUCT BRIEF 1x1 802.11abgn + BT4.0 + ZigBee The RS9113 n-Link module family is based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + BT4.0 + ZigBee Convergence SoC. The RS9113 module integrates a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband digital signal processor, analog front-end, crystal oscillator, calibration OTP memory, dualband RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI Flash thus providing a fully-integrated solution for embedded wireless applications. The RS9113 based chips and modules leverage and improve upon Redpines proven low power TM innovations from Lite-Fi products (RS9110) and provide WLAN 802.11n, BT4.0 and ZigBee convergence solution for integration into mobile and M2M communication devices. It can connect to a host processor through SDIO, USB, SPI or UART interfaces. Features and Benefits Ultra-low-power, low-cost and high-throughput 1 Tx 1 Rx Dual-band 802.11n + BT4.0 (dual-mode) + Zigbee (802.15.4-2009) Supports 20MHz and 40MHz bandwidth Data rates up to 150 Mbps using 1-Spatial Stream 802.11n WLAN Tx output power up to +18dBm WLAN Receiver with -97dBm Rx sensitivity High performance Bluetooth receiver with -94dBm Rx sensitivity Module with integrated antenna Module without integrated antenna Support for Bluetooth Transmit power class-1 with integrated PA High performance ZigBee receiver with -100dBm Rx sensitivity Support for multiple ZigBee output powers up to +19dBm with integrated PA Applications Innovative coexistence algorithms for optimum throughput of Wi-Fi and collocated Bluetooth and ZigBee modems IoT Devices Music and video players Integrated Ultra-low-power subsystem with <3uA watch-dog mode and <30uA standby VoWi-Fi phones Medical Devices mode. Smart Meters and in-home displays Industrial monitoring and control Hardware Assisted Radar-detection for compliance to FCC and ETSI norms, enabling Industrial automation and telemetry Home and building automation usage of more channels in the 5GHz band. Complete software along with host driver for various operating systems such as Evaluation Package Windows, Linux, Windows CE, and Android. The evaluation package comprises RS9113 n-Link module based evaluation board. Single supply 3.0 to 3.6 V operation. This is accompanied by firmware, reference drivers for Linux, Windows and Android Support for multiple host interfaces to allow maximum flexibility for the system operating systems with documentation. integrator. Host interfaces supported are USB 2.0, SDIO, SPI and UART RS9113 Module Block Diagram without integrated antenna RS9113 Module Block Diagram with integrated antenna R S 9 1 1 3Wireless Specifications Device Ordering Information The device numbering is based on the following naming convention. All the devices are labeled as Network Standard Support IEEE 802.11 a/b/g/n, 802.11j , 802.11d/e/i, 802.11w , 802.1X, 802.11k , RS9113-XYZ-ABC Where, 802.11v , 802.11r , 802.11h Bluetooth v2.1 EDR, v4.0 802.15.4-2009 (2.4GHz) Data Rates 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7) 802.11a/g: from 6 Mbps to 54 Mbps 802.11b: from 1 Mbps to 11 Mbps Bluetooth: 1, 2, 3Mbps 802.15.4-2009: 250Kbps Modulation Techniques OFDM with BPSK, QPSK, 16-QAM, 64-QAM 802.11b with CCK and DSSS Bluetooth: GFSK, DQPSK, 8DPSK 802.15.4-2009: DSSS 802.11n Advanced Features 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU Examples: inside A-MPDU and Virtual AP support RS9113-NBZ-S0N will refer to single band n-Link module with no antenna and integrated Wi-Fi, Bluetooth and Zigbee. Bluetooth Advanced Features Scatternet, Adaptive Frequency Hopping, Interlaced scanning, RS9113-N00-D1C will refer to a dual band Connect-io-n module with embedded single antenna and 15 active slaves in proprietary mode, hold, sniff and park modes integrated Wi-Fi. RS9113-NB0-S0W will refer to a single band WiSeConnect module with no antenna and integrated ZigBee Advanced Features CCM* security, orphan scanning, coordinator realignment Wi-Fi and Bluetooth. Wi-Fi modes Wi-Fi client, Access point, Wi-Fi Direct Bluetooth Modes Master, slave, scatternet Module Reference Design Redpine offers form-factor SPI, USB2.0, UART and SDIO reference designs along with software for ZigBee Modes ZigBee Coordinator , Router , End device manufacture testing and diagnostics. For details on availability please contact sales QoS WMM and WMM Power Save Support Host Interfaces USB 2.0, SPI, UART Other Peripherals/Interfaces I2C, I2S, SPI, QSPI, USART, GPIO, JTAG, Analog(ADC/DAC) and Ultra-low-power peripherals. Supply Voltage 3.0-3.6V, 1.8-3.6V Operating Temperature Industrial Grade -40C to +85C Software and Regulatory Certification Wi-Fi Alliance Compliance (802.11bgn, WPA, WPA2 Personal and Enterprise, WMM, WMM-PS, WPS, Wi-Fi Direct, Voice-Personal , Protected management frames ), Cisco CCX v5 , Bluetooth-SIG Qualification , Worldwide Regulatory Compliance: FCC (IDs are XF6-RS9113SB, XF6-RS9113DB) IC (IDs are 8407A-RS9113SB, 8407A-RS9113DB) CE/ETSI, TELEC , SRRC Typical Transmit Wi-Fi: 17.5 dBm for 802.11b DSSS Power(+/-2 dBm) 17.5 dBm for 802.11g/n OFDM 12 dBm for 802.11a/g/n OFDM Bluetooth: 15 dBm ZigBee : 15 dBm Rx sensitivity Wi-Fi: 1Mbps -97 dBm (< 8% PER) (+/- 1dBm) 54 Mbps -76.5 dBm (< 10% PER) MCS7(20MHz) -73 dBm (< 10% PER) MCS7(40MHz) -69.5 dBm (< 10% PER) Bluetooth: 1 Mbps -94 dBm 2 Mbps -92 dBm 3 Mbps -84 dBm BTLE(1Mbps) -91 dBm ZigBee: 250 Kbps -102 dBm (< 8% PER) : These features are not supported by current software releases. Contact Repine Signals Sales (sales redpinesignals.com) for details. : These certifications are in progress at this time. Contact Redpine Signals Sales (sales redpinesignals.com) for more details and for certifications not listed here. : Applicable to n-Link modules only For additional information, please contact Sales at Redpine Signals, Inc.: Redpine Signals, Inc. 2107 North First Street Suite 540 San Jose, CA 95131 Phone: +1 408 748 3385 Email: sales redpinesignals.com Website: www.redpinesignals.com Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a result of their use or application.Redpine, Redpine Signals, the Redpine logo, Driving Wireless Convergence, WiSeConnect and Lite-Fi are trademarks of Redpine Signals,Inc. All other company names, products and logos are registered trademarks of their respective companies. Copyright 2016 Redpine Signals, Inc. All Rights Reserved.