RS9116 Connectivity Product Family TM TM n-Link and WiSeConnect Redpine Signals RS9116 family of SoCs and modules provides a comprehensive multi-protocol wireless connectivity solution including 802.11 a/b/g/n (2.4 GHz and 5 GHz), 802.11j, dual-mode Bluetooth 5. Solution Highlights Co-existence of multiple wireless protocols managed by an internal protocol arbitration manager Ultra-low power consumption with multiple power modes to reduce the system energy consumption Multiple levels of security including FIPS 140-2 and PUF (Physically Unclonable Function) to create a highly secure system Fully integrated and wireless certified modules with multiple sizes as small as 4.63 mm x 7.90 mm Multiple software architectures (hosted and embedded) and host interfaces (SDIO, USB, SPI, UART) for easy integration with different processor families and operating systems Footprint compatible single band and dual band modules as well as hosted and embedded modules for easy migration within the product family Leading edge RF performance providing long range and higher throughputs Features TM Hosted Mode (n-Link ) Wi-Fi Host interfaces: SDIO 2.0 and USB HS Compliant to 1x1 IEEE 802.11 a/b/g/n, 802.11j (hosted mode) with TM Host drivers for Linux, Android , and Windows single band and dual band support Support for Client mode, Access point mode, Wi-Fi Direct, Concurrent Support for 20 MHz and 40 MHz channel bandwidths 1 client and access point mode, Enterprise Security Transmit power up to +20dBm with integrated PA 1 Support for concurrent Wi-Fi, dual-mode Bluetooth 5 Receive sensitivity as low as -97 dBm 1 Support for multiple Virtual Access Points Application data throughput up to 100 Mbps (Hosted Mode) in 1 802.11n with 40 MHz bandwidth and up to 50 Mbps with 20 MHz TM Embedded Mode (WiSeConnect ) bandwidth 1 Host interface: UART, SPI, USB HS, and USB HS CDC Application data throughput up to 90 Mbps (Embedded Mode) with 1 Support for Embedded Client mode, Access Point mode, Wi-Fi Direct 40 MHz bandwidth and up to 40 Mbps with 20 MHz bandwidth and Enterprise Security Data Rates:- 802.11b: Upto 11 Mbps 802.11g/a:Upto54 Mbps Supports advanced security features: WPA/WPA2-Personal and 802.11n: MCS0 to MCS7 Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, EAP-PEAP, EAP-LEAP, PEAP-MSCHAP-V2) Bluetooth Integrated TCP/IP stack (IPV4/IPV6), HTTP/HTTPS, DHCP, ICMP, SSL Compliant to dual-mode Bluetooth 5 1 3.0/TLS1.2, WebSockets, IGMP, DNS, DNS-SD, SNMP, FTP Client Transmit power up to +20 dBm with integrated PA 1 2 Bluetooth profile support for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, Receive sensitivity:- LE: -96 dBm, LR 125 Kbps: -102 dBm 1 SDP, L2CAP, RFCOMM, GATT, IAP1, IAP2 <5 mA transmit current in Bluetooth 5 mode, 2 Mbps data rate Wireless firmware upgrade and provisioning Data rates: 125 kbps, 500 kbps, 1 Mbps, 2Mbps, 3 Mbps Support for concurrent Wi-Fi, dual-mode Bluetooth 5 Operating Frequency Range:- 2.402 GHz - 2.480 GHz EDR+2.1, 4.0, 4.1, 4.2 and 5.0 Wireless Co-Existence Modes Bluetooth Low Energy 1 Mbps, 2 Mbps and Long Range modes Wi-Fi Access Point with support for upto 8 clients + Wi-Fi Client Piconet and scatternet 2 Wi-Fi Access Point + Bluetooth Low Energy Bluetooth profile support for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, Wi-Fi Client + Bluetooth Classic (EDR v 2.1) , Wi-Fi Client + Bluetooth SDP, L2CAP, RFCOMM, GATT, IAP1, IAP2 Low Energy RF Features Security Integrated baseband processor with calibration memory, RF HW device identity and key storage with PUF transceiver, high-power amplifier, balun, T/R switch and flash memory Accelerators: AES128/256, SHA256/384/512, RSA, ECC, ECDH, RNG, Dual external antenna (diversity supported) CRC WPA/WPA2-Personal, WPA/WPA2 Enterprise for Client, EAP-TLS, Operating Modes TM EAP-FAST, EAP-TTLS, PEAP-MSCHAP-v2 Hosted mode (n-Link ): Wi-Fi stack, Bluetooth stack and profiles and all network stacks reside on the host processor TM Power Consumption Embedded mode (WiSeConnect ): Wi-Fi stack, TCP/IP stack, IP 1 Wi-Fi standby associated current of <90 uA for DTIM 3 (2.4 GHz) modules, Bluetooth stack reside in RS9116W Some of Bluetooth 1 Wi-Fi TX current = 260 mA (6 Mbps, 20 dBm, 2.4 GHz), RX current = profiles reside in host processor 1 30 mA (6 Mbps, 2.4 GHz) 1 <7 mA transmit current in Bluetooth 5 mode, 0 dBm output power, 1 Mbps data rate www.redpinesignals.comSoftware and Regulatory Certifications Packages 2 Wi-Fi Alliance Module packages with and without antenna 2 Bluetooth Qualification SoC packages: WLCSP and QFN 2 FIPS 140-2 Certification 2 Regulatory certifications (FCC, IC, ETSI/CE, TELEC) Evaluation Kit: Single band P/N: RS9116X-SB-EVK1 Operating Conditions Dual band P/N: RS9116X-DB-EVK1 Single supply: 3.3V or 1.85V Operating temperature: -40C to +85C (Industrial grade) Package Options Module Packages SoC Packages Package Integrated Package Type Dimensions (mm) Frequency Band Note Package Code Type of Package Dimensions, Pitch (mm) Frequency Band Code Antenna Single Band (2.4 RS9113 WMS WLCSP, 96 3.51 x 3.60 x 0.5, 0.4 Single Band (2.4 GHz) AA0 LGA, 101 14 x 15 x 2.1 No GHz) compatible Antenna QMS QFN, 84 7 x 7 x 0.85, 0.5 Single Band (2.4 GHz) Single Band (2.4 RS9113 AA1 LGA, 79 16 x 27 x 3.1 and u.FL GHz) compatible Connector Dual Band (2.4 / 5 Part Ordering Options CC0 LGA, 173 9.1 x 9.8 x 1.2 No GHz) SoC Packages Part Number Wireless Module Packages (ppg) Antenna (ppg) Dual Band (2.4 / 5 CC1 LGA, 107 15.0 x 15.70 x 2.2 and u.FL GHz) Connector TM Hosted Connectivity (n-Link ) Single Band (2.4 RS9116N-SB00-ppg SBW+Bluetooth 5 QMS, WMS AA0, AA1, B00 B00 LGA, 126 4.63 x 7.90 x 0.9 No GHz) RS9116N-DB00-ppg DBW+Bluetooth 5 None CC0, CC1, MB0, HB0 Dual Band (2.4 / Two u.FL TM MB0 M.2, 75 23 x 30 Embedded Connectivity (WiSeConnect ) 5 GHz) Connectors RS9116W-SB00-ppg SBW+Bluetooth 5 QMS, WMS AA0, AA1, B00 Half Mini PCIe Dual Band (2.4 / 5 Two u.FL USB inter- HB0 26.8 x 30 RS9116W-DB00-ppg DBW+Bluetooth 5 None CC0, CC1 Card, 52 GHz) Connectors face Note: Replace ppg with desired SoC / Module Packages code SBW: Single Band Wi-Fi (2.4 GHz) DBW: Dual Band Wi-Fi (2.4/5 GHz) Block diagram Note: The BTSIG certified production parts for this product family will be available in early 2019. 1 2 : Subject to change. Contact Redpine Signals for final numbers. :Contact Redpine for availability. Redpine Signals, Inc. 2107 North First Street, Suite 540, San Jose, California 95131, United States of America. Phone: +1-408-748-3385 Fax: +1-408-705-2019 Email: sales redpinesignals.com Website: www.redpinesignals.com Copyright 2020 Redpine Signals, Inc. All Rights Reserved www.redpinesignals.com