SI4010-C2019GTR Silicon Labs

Si4010-C2 CRYSTAL-LESS SOC RF TRANSMITTER Features Crystal-less operation Single Coin-Cell Battery Operation Optional crystal oscillator input Supply voltage: 1.8 to 3.6 V High-Speed 8051 C Core Standby current < 10 nA Pipeline instruction architecture High-performance RF transmitter 70% of instructions in 1 or 2 clocks Frequency range: 27960 MHz Up to 24 MIPs with 24 MHz clock +10 dBm output power, adjustable 4 kB RAM/8kB NVM 128 bit EEPROM Automatic antenna tuning Symbol rate up to 100 kbps 256 byte of internal data RAM FSK/OOK modulation 12 kB ROM embedded functions 8 byte low leakage RAM Manchester, NRZ, 4/5 encoder Analog Peripherals Extensive Digital Peripherals 128 bit AES accelerator LDO regulator with POR circuit Battery voltage monitor 5/9 GPIO with wakeup functionality Temperature range 40 to +85 C LED driver Automotive quality option, Data serializer AEC-Q100 (Pending final High-speed frequency counter qualification testing) On-chip debugging: C2 10-pin MSOP/14-pin SOIC Unique 4 byte serial number Ultra low-power sleep timer Ordering Information: See page 15. Applications Garage and gate door openers Home automation and security Pin Assignments Remote keyless entry Wireless remote controls GPIO0/XTAL 1 10 GPIO1 Description GND 2 9GPIO2 The Si4010 is a fully integrated crystal-less CMOS SoC RF transmitter with an TXM 3 8 GPIO3 Si4010-GT embedded CIP-51 8051 MCU. The device can operate over the 40 to 85 C temperature range without requiring an external crystal reference source reducing TXP 4 7 GPIO4 board area and BOM cost. The device includes an 8 kB non volatile memory block VDD 5 6 LED for programming the user's application along with a 12 kB ROM of embedded 10-Pin MSOP support code for use in the user's application. The Si4010 includes Silicon Laboratories' 2-wire C2 Debug and Programming interface, which allows GPIO9 1 14 GPIO8 customers to download their code during the development stage into the on-board VPP/GPIO0/XTAL 2 13 GPIO1 RAM for testing and debug prior to programming the NVM. The Si4010 is designed for low power battery applications with standby currents of GND 3 12 GPIO2 less than 10 nA to optimize battery life and features automatic wake on button TXM 4 Si4010-GS 11 GPIO3 press support to efficiently move from the standby to active mode state with TXP 5 10 C2DAT/GPIO4 minimal customer code support. Built in AES-128 hardware encryption along with a 128-bit EEPROM can be used to create robust data encryption of the VDD 6 9 C2CLK/LED transmitted packets. A unique 4-byte serial number is programmed into each GPIO77G8PIO6 device ensuring non-overlapping device identifiers. 14-Pin SOIC The RF transmitter features a high efficiency PA capable of delivering output power up to +10 dBm and includes an automatic antenna tuning algorithm. This algorithm adjusts the antenna tuning at the start of each packet transmission for Patents pending optimal output power minimizing the impact of antenna impedance changes due to the remote being held in a user hand. The devices supports FSK and OOK modulations and includes automatic output power shaping to reduce spectral spreading and ease regulatory compliance. The output frequency can be adjusted via software over the entire 27 to 960 MHz range. The output data rate is software adjustable up to a maximum rate of 100 kbps. Rev. 1.0 2/11 Copyright 2011 by Silicon Laboratories Si4010Si4010-C2 Functional Block Diagram VDD Si4010 LDO REGULATOR CR2032 COIN CELL GND TXP 1.8 3.6 V LOOP DIVIDER PA ANTENNA TXM FSK OOK VDD INTEGRATED 8051 MCU LED I/O RAM/ NVM EEPROM GPIO INTERFACE ROM 8 Kbyte 128-bit PUSH BUTTONS 4/8 2 Rev. 1.0