TS3003 A 1.55V to 5.25V, 1.9A, 9kHz to 300kHz Silicon Timer FEATURES DESCRIPTION Ultra Low Supply Current: 1.9 A at 25kHz The TS3003 is a single-supply, second-generation Supply Voltage Operation: 1.55V to 5.25V oscillator/timer fully specified to operate at a supply Single Resistor Sets FOUT at 50% Duty Cycle voltage range of 1.55 V to 5.25 V while consuming less than 2.4 A(max) supply current. Requiring only Programmable FOUT Period: a resistor to set the base output frequency (or output 9kHz FOUT 300kHz period) at 25 kHz (or 40 s) with a 50% duty cycle, FOUT Period Accuracy: 3% the TS3003 timer/oscillator is compact, easy-to-use, FOUT Period Drift: 0.02%/C and versatile. Optimized for ultra-long life, low Single Resistor Sets Output Frequency frequency, battery-powered/portable applications, the Separate PWM Control and Buffered Output TS3003 joins the TS3001, TS3002, TS3004, and FOUT/PWMOUT Output Driver Resistance: TS3006 in the CMOS timer family of NanoWatt 160 Analog high-performance analog integrated circuits. The TS3003 output frequency can be user-adjusted from 9 kHz to 300 kHz with a single resistor. In addition, the TS3003 represents a 25% reduction in pcb area and a factor-of-10 lower power consumption APPLICATIONS over other CMOS-based integrated circuit oscillators/timers. When compared against industry- Portable and Battery-Powered Equipment standard 555-timer-based products, the TS3003 Low-Parts-Count Nanopower Oscillator offers up to 84% reduction in pcb area and over three Compact Micropower Replacement for Crystal and orders of magnitude lower power consumption. Ceramic Oscillators Micropower Pulse-width Modulation Control The TS3003 is fully specified over the -40C to +85C Micropower Pulse-position Modulation Control temperature range and is available in a low-profile, Micropower Clock Generation 10-pin 3x3 mm TDFN package with an exposed Micropower Sequential Timing back-side paddle. TYPICAL APPLICATION CIRCUIT Page 1 2014 Silicon Laboratories, Inc. All rights reserved. TS3003 ABSOLUTE MAXIMUM RATINGS V to GND................................................................. -0.3V to +5.5V Continuous Power Dissipation (T = +70C) DD A PWM CNTRL to GND ................................................ -0.3V to +5.5V 10-Pin TDFN (Derate at 13.48mW/C above +70C) ... 1078mW FOUT, PWMOUT to GND .......................................... -0.3V to +5.5V Operating Temperature Range ................................. -40C to +85C RSET to GND ............................................................. -0.3V to +2.5V Storage Temperature Range .................................. -65C to +150C CPWM to GND ........................................................... -0.3V to +5.5V Lead Temperature (Soldering, 10s) ...................................... +300C FDIV to GND .............................................................. -0.3V to +5.5V Electrical and thermal stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other condition beyond those indicated in the operational sections of the specifications is not implied. Exposure to any absolute maximum rating conditions for extended periods may affect device reliability and lifetime. PACKAGE/ORDERING INFORMATION PART ORDER NUMBER CARRIER QUANTITY MARKING Tape TS3003ITD1033 ----- & Reel 3003I Tape TS3003ITD1033T 3000 & Reel Lead-free Program: Silicon Labs supplies only lead-free packaging. Consult Silicon Labs for products specified with wider operating temperature ranges. Page 2 TS3003 Rev. 1.0