ZGM130S Z-Wave 700 SiP Module Data Sheet The Silicon Labs Z-Wave 700 SiP Module, ZGM130S, is a fully integrated Z-Wave module, enabling rapid development of Z-Wave solutions. KEY FEATURES It is an ideal solution for energy-friendly smart home control applications such as motion TX power up to 14 dBm sensors, door/window sensors, access control, appliance control, building automation, RX sensitivity 100 kbps: -103.9 dBm energy management, lighting, and security networks in the Internet of Things. Range: up to 1 mile Built with low-power Gecko technology, which includes innovative low energy techni- 9.8 mA RX current at 100 kbps, GFSK, 868 MHz ques, fast wake-up times and energy saving modes, the ZGM130S reduces overall pow- er consumption and maximizes battery life. 13.3 mA TX current at 0 dBm output power at 908 MHz The module contains a native security stack and a comprehensive set of hardware 0.8 A EM4H current (128 Byte RAM peripherals usable for advanced device functionality, and offers 64 kB of flash memory retention and RTCC running from LFRCO) for OEM applications. 32-bit ARM Cortex-M4 core at 39 MHz Flash memory: 512 kB (64 kB Application) Z-Wave 700 ZGM130S modules can be used in a wide variety of applications: RAM: 64 kB (8 kB Application) Smart Home Autonomous Hardware Crypto Accelerator Security and Random Number Generator Lighting Integrated DC-DC Converter Health and Wellness Robust peripheral set and up to 32 GPIO Metering External SAW filter optional Building Automation Core / Memory Crystal Clock Management Supply Energy Management Other H-F Crystal H-F Voltage Voltage CRYPTO 39 MHz Oscillator RC Oscillator Regulator Monitor 512 kByte Flash TM ARM Cortex M4 processor Program with DSP extensions, FPU and MPU CRC Memory Auxiliary H-F RC L-F DC-DC Power-On Oscillator RC Oscillator Converter Reset True Random Number Generator Ultra L-F RC LDMA Brown-Out ETM Debug Interface RAM Memory Controller Oscillator Detector SMU 32-bit bus Peripheral Reflex System RF frontend Radio Transceiver Serial I/O Ports Timers and Triggers Analog I/F Interfaces DEMOD ADC External USART Timer/Counter Protocol Timer Interrupts Analog Comparator IFADC I PGA Low Energy General Low Energy Low Energy LNA TM UART Purpose I/O Timer Sensor Interface RF frontend IDAC RF Frontend matching AGC PA Capacitive 2 I C Pin Reset Pulse Counter Watchdog Timer Q Frequency Touch Synthesizer VDAC MOD Real Time Pin Wakeup Counter and Cryotimer Op-Amp Calendar Lowest power mode with peripheral operational: EM0Active EM1Sleep EM2Deep Sleep EM3Stop EM4Hibernate EM4Shutoff silabs.com Building a more connected world. Rev. 1.2 CRC FRC RAC BUFC DCDC and decoupling componentsZGM130S Z-Wave 700 SiP Module Data Sheet Feature List 1. Feature List The ZGM130S highlighted features are listed below. Low Power Wireless System-on-Chip. Wide selection of MCU peripherals 12-bit 1 Msps SAR Analog to Digital Converter (ADC) High Performance 32-bit, 39 MHz ARM Cortex -M4 with DSP instruction and floating-point unit for efficient signal 2 Analog Comparator (ACMP) processing 2 Digital to Analog Converter (VDAC) Embedded Trace Macrocell (ETM) for advanced debugging 3 Operational Amplifier (Opamp) 512 kB flash program memory (64 kB available for user ap- Digital to Analog Current Converter (IDAC) plications) Low-Energy Sensor Interface (LESENSE) 64 kB RAM data memory (8kB available for user applica- Multi-channel Capacitive Sense Interface (CSEN) tions) 32 pins connected to analog channels (APORT) shared be- TX power up to 14 dBm tween analog peripherals Supports optional external SAW filter 32 General Purpose I/O pins with output state retention and Low Energy Consumption asynchronous interrupts 9.8 mA RX current at 100 kbps, GFSK, 868 MHz 8 Channel DMA Controller 40.1 mA TX current at 14 dBm output power at 912 MHz 12 Channel Peripheral Reflex System (PRS) 40.7 mA TX current at 13 dBm output power at 868 MHz 2 16-bit Timer/Counter 13.3 mA TX current at 0 dBm output power at 908 MHz 3 or 4 Compare/Capture/PWM channels 69 A/MHz in Active Mode (EM0) 1 32-bit Timer/Counter 0.8 A EM4 current (128 Byte RAM retention and RTCC 3 Compare/Capture/PWM channels running from LFRCO) 32-bit Real Time Counter and Calendar High Receiver Performance 16-bit Low Energy Timer for waveform generation -97.9 dBm sensitivity at 100 kbit/s GFSK, 868 MHz 32-bit Ultra Low Energy Timer/Counter for periodic wake-up -97.5 dBm sensitivity at 100 kbit/s GFSK, 915 MHz from any Energy Mode -103.9 dBm sensitivity at 100 kbit/s DSSS O-QPSK, 912 16-bit Pulse Counter with asynchronous operation MHz 2 Watchdog Timer Supported Protocols: 3 Universal Synchronous/Asynchronous Receiver/Trans- Z-Wave 2 mitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I S) Z-Wave Long Range Low Energy UART (LEUART ) Support for Internet Security 2 2 I C interface with SMBus support and address recogni- General Purpose CRC tion in EM3 Stop True Random Number Generator (TRNG) Wide Operating Range 2 Hardware Cryptographic Acceleration for AES 128/256, 1.8 V to 3.8 V single power supply SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC Integrated DC-DC -40 C to 85 C Dimensions 9 9 1.21 mm silabs.com Building a more connected world. Rev. 1.2 2