Electronic counters SLE-73 economical pulse counter 1 pulse counting input 1 programmable function input power supply output 24V DC prescaler and digital filter RS-485 / Modbus RTU The SLE-73 meters have been designed exclusively for Typical applications applications where a progressive counting of impulses is required. They feature two entry ports: counting and with a 1. Counting amount of manufactured elements. programmable function that can be used for resetting the meter to zero or stopping / changing its direction of travel (as required). The built-in entry port divisor with programmable value from 1 to 9999, along with an adjustable decimal point, permits a simple transfer of incoming impulses into the units required. - easy-to-operate device programming menu, - programmable input divider: 1-9999, - password protection, - switching off counter reset, - programmable decimal point position, - available with AC and DC power supply versions. Examplary pin assignment Technical data Power supply: 19V 50V DC 16V 35V AC or 85 260V AC/DC, all separated RS-485 Power consumption: for 85 260V AC/DC and 16V 35V AC power supply: +24V +5% -10% max. 4,5 VA 19V 50V DC power supply: max. 4,5 W Imax.100mA GND DATA - Display: LED, red, 6 x 9 mm high + Uo - DATA + Inputs: pulse 1 x counting PNP (down-up and up-down) 1 x programmable (PNP) Input levels: low: 0 V 1 V 16 17 18 19 20 high: 10 V 30 V L N Max. input frequency: electronic: 3 kHz 1 2 6 7 8 9 10 contact: max. 90 Hz (adjustable filter) n.c. n.c. Displayed values range: from -99999 to 999999, with signalling of overfilling 85-260V - common input Transducer power supply output: 24V DC +5%, -10% / max. 100 mA, stabilized, AC/DC + programmable input (PNP) not insulated from communication interface 50/60Hz + counting input (PNP) Communication interface: RS-485, 8N1 and 8N2, 1200 bit/s 115200 bit/s, Modbus 4W RTU (not galvanically insulated) Data memory: non-volatile memory, EEPROM type Operating temperature: 0C +50C (standard), -20C +50C (option) Storage temperature: -10C +70C (standard), -20C +70C (with option 08) Ordering Protection class: IP 65 (front), available additional frame IP 65 for panel cut-out sealing IP 20 (case and connection clips) Case: board SLE-73-1400-1-X-XX1 Case material: NORYL - GFN2S E1 options: Case dimensions: 72 x 36 x 97 mm 00 : no options Panel cut-out dimensions: 66,5 x 32,5 mm 01 : IP 65 frame Installation depth: min. 102 mm Board thickness: max. 5 mm 08 : operating temp. -20C +50C power supply: 3 : 24V AC/DC 4 : 85V - 260V AC/DC V.13.01.1 3.1.1. 80-556 Gdask, ul. Wielopole 7, tel. (+48 58) 762-07-77, fax 762-07-70, www.simex.pl, e-mail: info simex.com.plX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Counters & Tachometers category: Click to view products by Simex manufacturer: Other Similar products are found below : LC2H-FE-2K-N H7CN-XLN DC12-48 LC24-F-N H7CXAWD1NDC1224AC24 H7ER-NV1-H H7CX-A114S-N AC100-240 H7CX-AWSD- N-DC12-24 H7CX-AU-N AC100-240 GPMZC-SET CX6S-1P2F CX6S-1P4F CX6S-2P2F CX6S-2P4F H127.010A01H H5KLR-11 100- 240V AC/DC H7CX-AUD1-N H7CX-AW-N 3.550.401.075 3.550.401.351 LC2H-C-2K-N LC2H-C-30-N LC2H-F-DL-2KK LC4H-R4- AC240VS LC4H-R6-AC240V 1.150.510.012.550 1.150.510.054.550 1.150.510.056.550 6.520.012.300 6.560.010.300 SLE-73-1400-1-4-01 SLIK-94-1521-1-3-001 SLN-94-1421-1-3 SPI-73-1411-1-3-011 CT6S-1P4 Y-50 LC4H-R4-AC24V LC4H-R4-DC24V CT6S-2P4 LC2H-F- DL-2KK-B LC2H-FE-DL-2KK-B LC2H-FE-FV-30 H127.010A01G H5KLR-8B 12-48 AC/DC H7CX-A11-N H7CX-AD-N H7CX-AU-N H7ER-NV1 H8DA 12-48V AC/DC 87622062 99776901