Product Data Sheet Product Data Sheet 3M Metal-Out Static Shielding Bag 1500 This transparent metal-out static shielding bag is designed to provide a static safe Physical Typical Value Testing Method environment for sensitive electronic devices. Bags are printed with an ESD warning Tensile Strength 4900 PSI, 34 MPa ASTM D882 symbol and a lot code for traceability. Open top and ZipTop styles are available. The Puncture Resistance 10 lbs, 44 N MIL-STD-3010C Method 2065 bags are heat sealable. Seal Strength 14 lbs, 62 N ASTM D882 3M Static Shielding Bags are manufactured from a top coat, metal, polyester, Thickness 3 mils, .0762 mm +/-15% MIL-STD-3010C Method 1003 polyethylene laminate. The proprietary top coating is designed to protect the metal Marking Adhesion Pass IPC-TM-650 2.4.1 layer. Polyester dielectric, in concert with the metal layer, is intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of Transparency 40% Tobias electric field. Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 These bags are tested to meet or exceed certain electrical and physical requirements 11 of ANSI/ESD S541 and to be ANSI/ESD S20.20 program compliant. Bags are RoHS Surface Resistance - <1x10 ohms ANSI/ESD STM11.11 Compliant* and lead-free**. Interior 6 Surface Resistance - <1x10 ohms ANSI/ESD STM11.11 Exterior Static Decay < 2 seconds ETS 406D Charge Retention <100 volts CPM-3M TP.21XX 3M Metal-Out Static Shielding Bag1500 Cleanliness Typical Value Testing Method Silicone Not Detected FTIR Heat Sealing Conditions Typical Value Temperature 300F 375F, 149C 190C Time 0.5 3.5 seconds Pressure 30 70 PSI, 206 482 KPa This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Progam.Product Data Sheet Open Top Bag ZipTop Bag Open Top Bag ZipTop Bag 3M Metal-Out Static Shielding Bag 1500 3M Metal-Out Static Shielding Bags, Open Top 1500 Dimensions Part No. Dimensions Part No. Dimensions Part No. (W x L in.) (W x L in.) (W x L in.) 3 x 5 15035 8 x 12 150812 12 x 18 1501218 4 x 6 15046 9 x 12 150912 14 x 18 1501418 5 x 8 15058 10 x 12 1501012 15 x 18 1501518 6 x 8 15068 10 x 14 1501014 16 x 24 1501624 6 x 10 150610 10 x 24 1501024 18 x 18 1501818 6 x 30 150630 11 x 15 1501115 18 x 24 1501824 7 x 15 150715 12 x 16 1501216 Standard sizes stocked fTolerance (inches): Width -0, +0.250 Lengor prompt shipment (usually same dath +/- 0.125 Oy). Tolerance (inches):set 0 to 0.250 ff Width -0, +0.250 Custom Sizes and Printing Available. Width is measured from inside seam to inside seam.Seal width +/- 0.125 Length +/- 0.125 Offset 0 to 0.250 Length is measured from the top edge to the bottom fold. Seal width +/- 0.125 Opening is in the width dimension. 3M Metal-Out Static Shielding Bags, ZipTop 1500 Custom bag sizes, custom printing, and custom hot stamping are available. Dimensions Part No. Dimensions Part No. Dimensions Part No. Most sizes are packed 100 per case. (W x L in.) (W x L in.) (W x L in.) Small sizes are packed 500 or 1,000 per case. 3 x 5 150Z35 6 x 8 150Z68 10 x 12 150Z1012 4 x 4 150Z44 6 x 10 150Z610 12 x 18 150Z1218 Important Notice All statements, technical information, and recommendations related to 3Ms products 4 x 6 150Z46 8 x 10 150Z810 12 x 18 1911218 are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for Custom Sizes and Printing Available. your intended application. You assume all risks and liability associated with such use. Any 3M is a trademark of 3M Compan y. All other trademarks are owned by their respective companies. statements related to the product which are not contained in 3Ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless * RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum concentration values (MCVs) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This expressly agreed upon, in writing, by an authorized officer of 3M. information represents 3Ms knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. Warranty Limited Remedy Limited Liability. In the event any product is proven not to conform with 3Ms Regulatory Information, then 3Ms entire liability and Buyers exclusive This product will be free from defects in material and manufacture for one year from the remedy will be in accordance with the Warranty section. time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT **Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 3051A/3052. FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M 3 will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Electronic Solutions Division Static Control Products 926 JR Industrial Drive Sanford, NC 27332 Toll-Free: 866-722-3736 International: 919-718-0000 Please recycle. Printed in USA. Email: 3mstaticinfo mmm.com 3M 2014. All rights reserved. www.3Mstatic.com 98-0799-1154-5 JHA