SiT1602 Low Power, Standard Frequency Oscillator The Smart Timing Choice The Smart Timing Choice Features Applications 51 standard frequencies between 3.75 MHz and 77.76 MHz Ideal for DSC, DVC, DVR, IP CAM, Tablets, e-Books, SSD, GPON, EPON, etc 100% pin-to-pin drop-in replacement to quartz-based XO Excellent total frequency stability as low as 20 PPM Ideal for high-speed serial protocols such as: USB, SATA, SAS, Firewire, 100M / 1G / 10G Ethernet, etc. Low power consumption of 3.6 mA typical Standby mode for longer battery life Fast startup time of 5 ms LVCMOS/HCMOS compatible output Industry-standard packages: 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm x mm Instant samples with Time Machine II and field programmable oscillators Pb-free, RoHS and REACH compliant 1 Electrical Characteristics Parameter and Conditions Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f(Refer to the frequency list page 10) MHz 51 standard frequencies between 3.75 MHz and 77.76 MHz Frequency Stability and Aging Frequency Stability F stab -20 +20 PPM Inclusive of Initial tolerance at 25C, 1st year aging at 25C, and variations over operating temperature, rated power supply -25 +25 PPM voltage and load. -50 +50 PPM Operating Temperature Range Operating Temperature Range T use -20 +70 C Extended Commercial -40 +85 C Industrial Supply Voltage and Current Consumption Supply Voltage Vdd 1.62 1.8 1.98 V Contact SiTime for 1.5V support 2.25 2.5 2.75 V 2.52 2.8 3.08 V 2.7 3.0 3.3 V 2.97 3.3 3.63 V 2.25 3.63 V Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V 3.6 4.2 mA No load condition, f = 20 MHz, Vdd = 2.5V 3.4 3.9 mA No load condition, f = 20 MHz, Vdd = 1.8V OE Disable Current I OD 4 mA Vdd = 2.5V to 3.3V, OE = GND, output is Weakly Pulled Down 3.8 mA Vdd = 1.8 V. OE = GND, output is Weakly Pulled Down Standby Current I std 2.6 4.3 AST = GND, Vdd = 2.8V to 3.3V, Output is Weakly Pulled Down 1.4 2.5 AST = GND, Vdd = 2.5V, Output is Weakly Pulled Down 0.6 1.3 AST = GND, Vdd = 1.8V, Output is Weakly Pulled Down LVCMOS Output Characteristics Duty Cycle DC 45 55 % All Vdds Rise/Fall Time Tr, Tf 1 2 ns Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% 1.3 2.5 ns Vdd =1.8V, 20% - 80% 2 ns Vdd = 2.25V - 3.63V, 20% - 80% Output High Voltage VOH 90% Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V) IOH = -3 mA (Vdd = 2.8V and Vdd = 2.5V) IOH = -2 mA (Vdd = 1.8V) Output Low Voltage VOL 10% Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V) IOL = 3 mA (Vdd = 2.8V and Vdd = 2.5V) IOL = 2 mA (Vdd = 1.8V) Input Characteristics Input High Voltage VIH 70% Vdd Pin 1, OE or ST Input Low Voltage VIL 30% Vdd Pin 1, OE or ST Input Pull-up Impedence Z in 87 100 k Pin 1, OE logic high or logic low, or ST logic high 2 M Pin 1, ST logic low Note: 1. All electrical specifications in the above table are specified with 15 pF output load and for all Vdd(s) unless otherwise stated. SiTime Corporation 990 Almanor Avenue Sunnyvale, CA 94085 (408) 328-4400 www.sitime.com Rev. 1.2 Revised March 26, 2015SiT1602 Low Power, Standard Frequency Oscillator The Smart Timing Choice The Smart Timing Choice 1 Electrical Characteristics (continued) Parameter and Conditions Symbol Min. Typ. Max. Unit Condition Startup and Resume Timing Startup Time T start 5 ms Measured from the time Vdd reaches its rated minimum value Enable/Disable Time T oe 130 ns f = 110 MHz. For other frequencies, T oe = 100 ns + 3 * cycles Resume Time T resume 5 ms Measured from the time ST pin crosses 50% threshold Startup Time T start 5 ms Measured from the time Vdd reaches its rated minimum value Jitter RMS Period Jitter T jitt 1.76 3 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 1.78 3 ps f = 75 MHz, Vdd = 1.8V RMS Phase Jitter (random) T phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz Notes: 1. All electrical specifications in the above table are specified with 15 pF output load and for all Vdd(s) unless otherwise stated. Pin Description Pin Symbol Functionality Top View 2 Output H or Open : specified frequency output OE/ ST Enable L: output is high impedance. Only output driver is disabled. 1 1 4 2 OE/ST VDD H or Open : specified frequency output 22 Standby L: output is low (weak pull down). Device goes to sleep mode. Supply current reduces to I std. 3 2 GND Power Electrical ground 2 3 OUT GND 3 OUT Output Oscillator output 3 4 VDD Power Power supply voltage Notes: 2. A pull-up resistor of <10 k between OE/ ST pin and Vdd is recommended in high noise environment. 3. A capacitor value of 0.1 F between Vdd and GND is required. Absolute Maximum Attempted operation outside the absolute maximum ratings of the part may cause permanent damage to the part. Actual perfor- mance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings. Parameter Min. Max. Unit Storage Temperature -65 150 C VDD -0.5 4 V Electrostatic Discharge 2000 V Soldering Temperature (follow standard Pb free soldering guidelines) 260 C Junction Temperature 150 C Thermal Consideration JA, 4 Layer Board JA, 2 Layer Board JC, Bottom Package (C/W) (C/W) (C/W) 7050 191 263 30 5032 97 199 24 3225 109 212 27 2520 117 222 26 2016 124 227 26 Environmental Compliance Parameter Condition/Test Method Mechanical Shock MIL-STD-883F, Method 2002 Mechanical Vibration MIL-STD-883F, Method 2007 Temperature Cycle JESD22, Method A104 Solderability MIL-STD-883F, Method 2003 Moisture Sensitivity Level MSL1 260C Rev. 1.2 Page 2 of 11 www.sitime.com