SiT8008B Low Power Programmable Oscillator The Smart Timing Choice Features Applications Ideal for DSC, DVC, DVR, IP CAM, Tablets, e-Books, SSD, Any frequency between 1 MHz and 110 MHz accurate to 6 decimal GPON, EPON, etc places 100% pin-to-pin drop-in replacement to quartz-based XO Ideal for high-speed serial protocols such as: USB, SATA, SAS, Firewire, 100M / 1G / 10G Ethernet, etc. Excellent total frequency stability as low as 20 ppm Operating temperature from -40C to 85C. For 125C and/or -55C options, refer to SiT1618, SiT8918, SiT8920 Low power consumption of 3.5 mA typical at 1.8V Standby mode for longer battery life Fast startup time of 5 ms LVCMOS/HCMOS compatible output Industry-standard packages: 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm x mm Instant samples with Time Machine II and field programmable oscillators RoHS and REACH compliant, Pb-free, Halogen-free and Antimony-free For AEC-Q100 oscillators, refer to SiT8924 and SiT8925 Electrical Specifications Table 1. Electrical Characteristics All Min and Max limits are specified over temperature and rated operating voltage with 15 pF output load unless otherwise stated. Typical values are at 25C and nominal supply voltage. Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f 1 110 MHz Frequency Stability and Aging Frequency Stability F stab -20 +20 ppm Inclusive of initial tolerance at 25C, 1st year aging at 25C, and variations over operating temperature, rated power supply -25 +25 ppm voltage and load. -50 +50 ppm Operating Temperature Range Operating Temperature Range T use -20 +70 C Extended Commercial -40 +85 C Industrial Supply Voltage and Current Consumption Supply Voltage Vdd 1.62 1.8 1.98 V Contact SiTime for 1.5V support 2.25 2.5 2.75 V 2.52 2.8 3.08 V 2.7 3.0 3.3 V 2.97 3.3 3.63 V 2.25 3.63 V Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V 3.7 4.2 mA No load condition, f = 20 MHz, Vdd = 2.5V 3.5 4.1 mA No load condition, f = 20 MHz, Vdd = 1.8V OE Disable Current I OD 4.2 mA Vdd = 2.5V to 3.3V, OE = GND, Output in high-Z state 4.0 mA Vdd = 1.8V, OE = GND, Output in high-Z state Standby Current I std 2.1 4.3 A ST = GND, Vdd = 2.8V to 3.3V, Output is weakly pulled down 1.1 2.5 A ST = GND, Vdd = 2.5V, Output is weakly pulled down 0.2 1.3 A ST = GND, Vdd = 1.8V, Output is weakly pulled down LVCMOS Output Characteristics Duty Cycle DC 45 55 % All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 Rise/Fall Time Tr, Tf 1 2 ns Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% 1.3 2.5 ns Vdd =1.8V, 20% - 80% 2 ns Vdd = 2.25V - 3.63V, 20% - 80% Output High Voltage VOH 90% Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V) IOH = -3 mA (Vdd = 2.8V and Vdd = 2.5V) IOH = -2 mA (Vdd = 1.8V) Output Low Voltage VOL 10% Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V) IOL = 3 mA (Vdd = 2.8V and Vdd = 2.5V) IOL = 2 mA (Vdd = 1.8V) SiTime Corporation 990 Almanor Avenue, Sunnyvale, CA 94085 (408) 328-4400 www.sitime.com Rev. 1.03 Revised August 30, 2016 SiT8008B Low Power Programmable Oscillator The Smart Timing Choice Table 1. Electrical Characteristics (continued) Parameters Symbol Min. Typ. Max. Unit Condition Input Characteristics Input High Voltage VIH 70% Vdd Pin 1, OE or ST Input Low Voltage VIL 30% Vdd Pin 1, OE or ST Input Pull-up Impedance Z in 50 87 150 k Pin 1, OE logic high or logic low, or ST logic high 2 M Pin 1, ST logic low Startup and Resume Timing Startup Time T start 5 ms Measured from the time Vdd reaches its rated minimum value Enable/Disable Time T oe 130 ns f = 110 MHz. For other frequencies, T oe = 100 ns + 3 * cycles Resume Time T resume 5 ms Measured from the time ST pin crosses 50% threshold Jitter RMS Period Jitter T jitt 1.8 3 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 1.8 3 ps f = 75 MHz, Vdd = 1.8V Peak-to-peak Period Jitter T pk 12 25 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 14 30 ps f = 75 MHz, Vdd = 1.8V RMS Phase Jitter (random) T phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz Table 2. Pin Description Pin Symbol Functionality Top View 1 Output H : specified frequency output Enable L: output is high impedance. Only output driver is disabled. 1 1 4 OE/ST/NC VDD H : specified frequency output 1 OE/ ST/NC Standby L: output is low (weak pull down). Device goes to sleep mode. Supply current reduces to I std. 1 Any voltage between 0 and Vdd or Open : Specified frequency No Connect output. Pin 1 has no function. OUT GND 2 3 2 GND Power Electrical ground 3 OUT Output Oscillator output 2 4 VDD Power Power supply voltage Figure 1. Pin Assignments Notes: 1. In OE or ST mode, a pull-up resistor of 10 k or less is recommended if pin 1 is not externally driven. If pin 1 needs to be left floating, use the NC option. 2. A capacitor of value 0.1 F or higher between Vdd and GND is required. Rev. 1.03 Page 2 of 13 www.sitime.com