SiT9365AC-1B2-33E125.000000G SiTime

SiT9365 Standard Frequency Ultra-low Jitter Differential Oscillator Description Features The SiT9365 is a differential MEMS XO supporting 32 standard frequencies from 25 MHz to 325 MHz standard frequencies between 25 MHz and 325 MHz, (For additional frequencies, refer to SiT9366 and and engineered for low-jitter applications. Utilizing SiT9367 datasheets) SiTimes unique DualMEMS temperature sensing and LVPECL, Low-swing LVPECL, LVDS and HCSL output TurboCompensation technology, the SiT9365 delivers signaling exceptional dynamic performance by providing 0.1 ps RMS phase jitter (random) for Ethernet applications resistance to airflow, thermal gradients, shock and Frequency stability as low as 10 ppm vibration. This device also integrates multiple on-chip Wide temperature ranges from -40C to 105C regulators to filter power supply noise, eliminating the 2 2 Industry-standard packages: 3.2 x 2.5 mm , 7.0 x 5.0 mm need for a dedicated external LDO. 2 and 5.0 x 3.2 mm package The SiT9365 can be factory programmed for specific combinations of frequency, stability, voltage, and output Applications signaling. Programmability enables designers to optimize clock configurations while eliminating long lead times and 10/40/100 Gbps Ethernet, SONET, SATA, SAS, customization costs associated with quartz devices Fibre Channel where each frequency is custom built. Telecom, networking, instrumentation, storage, servers Standard frequencies and programmability makes this device ideal for telecom, networking, and industrial applications that require a variety of frequencies and operate in noisy environments. Refer to Manufacturing Notes for proper reflow profile, tape and reel dimension, and other manufacturing related information. Block Diagram Package Pinout OE/NC 1 6 VDD 2 5 NC OUT- 3 4 GND OUT+ Figure 1. SiT9365 Block Diagram Figure 2. Pin Assignments (Top view) (Refer to Table 7 for Pin Descriptions) Rev 1.1 20 July 2021 www.sitime.com SiT9365 Standard Frequency Ultra-low Jitter Differential Oscillator Ordering Information SiT9365AC -1B2-33E125.000000T Part Family Packaging SiT9365 T, Y, D or E Refer to table below for packing method 1 Leave Blank for Bulk Revision Letter A is the revision of Silicon Frequency See supported frequency list below Temperature Range C: Extended Commercial, -20 to 70C I: Industrial, -40 to 85C Feature Pin B: -40 to 95 C N: No Connect E: Extended Industrial, -40 to 105C E: Output Enable Signalling Type Voltage Supply 1: LVPECL 25: 2.5 V 10% 2: LVDS 28: 2.8 V 10% 4: HCSL 30: 3.0 V 10% 5: Low-swing LVPECL 33: 3.3 V 10% Package Size B: 3.2 x 2.5 mm C: 5.0 x 3.2 mm with center pad E: 7.0 x 5.0 mm with center pad Frequency Stability F: 10 ppm 1: 20 ppm 2: 25 ppm 3: 50 ppm Notes: 1. Bulk is available for sampling only. Table 1. Supported Frequencies 25.000000 MHz 30.720000 MHz 50.000000 MHz 53.125000 MHz 61.440000 MHz 62.500000 MHz 74.175824 MHz 74.250000 MHz 75.000000 MHz 77.760000 MHz 98.304000 MHz 100.000000 MHz 106.250000 MHz 122.880000 MHz 125.000000 MHz 133.333333 MHz 148.351648 MHz 150.000000 MHz 153.600000 MHz 155.520000 MHz 156.250000 MHz 159.375000 MHz 160.000000 MHz 161.132813 MHz 166.666666 MHz 168.040678 MHz 200.000000 MHz 212.500000 MHz 250.000000 MHz 300.000000 MHz 322.265625 MHz 325.000000 MHz Table 2. Ordering Codes for Supported Tape & Reel Packing Method Device Size 8 mm T&R 8 mm T&R 12 mm T&R 12 mm T&R 16 mm T&R 16 mm T&R (mm x mm) (3ku) (1ku) (3ku) (1ku) (3ku) (1ku) 7.0 x 5.0 T Y 5.0 x 3.2 T Y 3.2 x 2.5 D E Rev 1.1 Page 2 of 16 www.sitime.com