DATA SHEET AA103-72/-72LF: 10 MHz - 2.5 GHz GaAs One-Bit Digital Attenuator (10 dB LSB) Applications Cellular radio Wireless data systems WLL gain level control circuits Features Attenuation: 10 dB Single, positive control voltage: 3 V Low loss Small SOT-5 package (MSL1, 260 C per JEDEC J-STD-020) Figure 1. AA103-72/-72LF Block Diagram Description The AA103-72/-72LF are one-bit GaAs FET digital attenuators in a low-cost SOT-5 package. These devices provide an LSB of 10 dB. The AA103-72/-72LF are particularly suited where high attenuation accuracy, low insertion loss, and low intermodulation products are required. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Figure 2. AA103-72/-72LF Pinout 5-Pin SOT-5 (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200199C Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice February 24, 2011 1 DATA SHEET AA103-72/-72LF 1-BIT DIGITAL ATTENUATOR Table 1. AA103-72/-72LF Signal Descriptions Pin Name Description Pin Name Description 1 J1 RF port. Must be DC blocked. 4 V1 DC control bias 2 RF GND RF ground. Must be AC-coupled to ground. 5 V2 DC control bias 3 J2 RF port. Must be DC blocked. Table 2. AA103-72/-72LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units RF input power PIN 1 W > 500 MHz 0/8 V dBm 0.5 W 50 MHz 0/8 V dBm Supply voltage VS 8 V Control voltage VCTL 0.2 +8.0 V Operating temperature TOP 40 +85 C Storage temperature TSTG 65 +150 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The state of the AA103-72/-72LF is determined by the logic Electrical and Mechanical Specifications provided in Table 4. The absolute maximum ratings of the AA103-72/-72LF are provided in Table 2. Electrical specifications are provided in Tables 3. Typical performance characteristics of the AA103-72/-72LF are illustrated in Figures 3 through 5. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 February 24, 2011 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200199C