DATA SHEET SE2436L: High Power 2.4 GHz 802.15.4 Front End Module Applications Product Description The SE2436L is a high performance, fully integrated Smart Meters RF Front End Module designed for ZigBee/Smart In-home appliances Energy and 802.15.4 applications requiring high Smart thermostats transmit power. Features The SE2436L is designed for ease of use and Integrated PA with 27 dBm output power maximum flexibility, with fully matched 50 output, Integrated LNA with programmable bypass and 100 differential input , integrated inter-stage Integrated antenna switching with Tx and Rx matching and harmonic filter, and digital controls diversity function compatible with 1.6 3.6 V CMOS levels. Low FEM noise figure of 2.5 dB typical Differential 100 common Tx/Rx RF interface The RF blocks operate over a wide supply voltage range from 2.0 to 4.8V allowing the SE2436L to be Fast switch ON/OFF time <1 sec used in battery powered applications over a wide 2.0 V 4.8 V supply operation spectrum of the battery discharge curve. Sleep mode current <1 A 4 x 4 x 0.9 mm 24 pin QFN Pb-free, RoHS compliant and Halogen free Ordering Information Part No. Package Remark SE2436L-S 24 pin QFN Samples SE2436L-R 24 pin QFN Tape & Reel SE2436L-EK1 N/A Evaluation kit Functional Block Diagram Logic Control PA ANT1 VB TRP TRN Balun ANT2 LNA AUX K071 Figure 1: Functional Block Diagram Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 202413C Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice February 14, 2014 1 CPS CTX CSD CRX ANT SEL DATA SHEET SE2436L: High Power 2.4 GHz 802.15.4 Front End Module Pin Out Diagram Figure 2: SE2436L Pinout Pin Out Description Pin No. Name Description 1 ANT SEL Connect to GPIO signal to control antenna switch (see Logic controls table) 2 VB I/O balun DC connection (optional, please refer to SoC or RFIC requirements) 3 TRP Transmit/Receive port from/to transceiver, 100 differential 4 TRN Transmit/Receive port from/to transceiver, 100 differential 5 CRX Connect to GPIO signal to control SE2436L modes (see Logic controls table) 6 VCC1 Connect to positive supply 7 CSD Connect to GPIO signal to control SE2436L modes (see Logic controls table) 8 VCC2 Connect to positive supply 9 CTX Connect to GPIO signal to control SE2436L modes (see Logic controls table) 10 GND Connect to PCB ground 11 CPS Connect to GPIO signal to control SE2436L modes (see Logic controls table) 12 VCC3 Connect to positive supply 13 DNC Leave unconnected 14 DNC Leave unconnected 15 DNC Leave unconnected 16 DNC Leave unconnected Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 202413C Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice February 14, 2014 2