DATA SHEET SE5516A: Dual-Band 802.11a/b/g/n/ac WLAN Front-End Module Applications 802.11a/b/g/n/ac WLANs Computing, networking Control, Decode TG Features 2G SP3T All RF ports matched to 50 RG LNA Switch ANT Integrated 2.4 GHz PA, 5 GHz PA, transmit filter, transmit/receive switches, and diplexers Integrated power detector for each transmit chain 2G Match 2G PA Power: Filter 5G RA +21 dBm, 802.11b, 11 Mbps, ACPR = +35 dBc LNA Det Diplexer +18 dBm 3.0% EVM, 802.11n, 64 QAM, 2G +16 dBm 3.0% EVM, 802.11n, 64 QAM, 5G 5G Filter 5G PA TA +16 dBm 1.8% EVM, 802.11ac, 256 QAM, 2G +13 dBm 1.8% EVM, 802.11ac, 256 QAM, 5G Single supply voltage: 3.3 V 10% S2932 Small LGA (24-pin, 4 x 4 mm) package (MSL3, 240 C per JEDEC J-STD-020) Figure 1. SE5516A Block Diagram TM Skyworks Green products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks TM Denition of Green , document number SQ040074. All RF ports are matched to 50 to simplify th PCB layout and the interface to the transceiver. The device also includes a Description transmitter power detector with 20 dB of dynamic range for each The SE5516A is a complete 802.11a/b/g/n/ac WLAN RF Front-End transmit chain. Each PA has a separate digital enable control for Module (FEM) that provides all the functionality of the Power transmitter on/off control. The power ramp rise/fall time is Amplifiers (PAs), filtering, power detector, transmit/receive (T/R) < 0.4 s. switch, diplexers, and associated matching. The SE5516A also provides a notch filter from 3.260 to 3.267 GHz The device provides a complete 2.4 GHz and 5.0 GHz WLAN RF and 3.28 to 3.89 GHz before the input of each 2.4 GHz and solution from the output of the transceiver to the antenna in an 5.0 GHz PA, respectively. ultra-compact form factor. The SE5516A delivers < 2% EVM at The SE5516A is manufactured in a compact, 4 x 4 mm, 24-pin rated AC power, which meets the stringent linearity conditions of Land Grid Array (LGA) package. the 802.11ac standard. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 202396J Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice June 27, 2019 1 ENA ENG DET C0 C1DATA SHEET SE5516A: DUAL-BAND 802.11a/b/g/n/ac WLAN FEM 24 23 22 21 20 19 1 18 ENG TA 2 17 GND GND 3 16 GND RA ANT 4 15 RG 5 14 GND GND 6 13 C1 TG 78 9 10 11 12 S2934 Figure 2. SE5516A Pinout (Top View) Table 1. SE5516A Signal Descriptions Pin Name Description Pin Name Description 1 ENG 2.4 GHz PA enable 13 TG 2.0 GHz transmit RF input 2 GND Ground 14 GND Ground 3 GND Ground 15 RG 2.0 GHz receive RF output 4 ANT Antenna 16 RA 5.0 GHz receive RF output 5 GND Ground 17 GND Ground 6 C1 Switch control logic 1 18 TA 5.0 GHz transmit RF input 7 C0 Switch control logic 0 19 ENA 5.0 GHz PA enable 8 GND Ground 20 VCC3 Supply voltage 9 VCC1 Supply voltage 21 VCC4 Supply voltage 10 VCC2 Supply voltage 22 DET 2.0/5.0 GHz power detector output 11 GND Ground 23 GND Ground 12 GND Ground 24 GND Ground Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 June 27, 2019 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 202396J C0 GND GND GND VCC1 DET VCC2 VCC4 GND VCC3 GND ENA