DATA SHEET SKY12213-478LF: 0.5 to 6.0 GHz, 150 W High Power Silicon PIN Diode SPST Switch Applications Failsafe switching in TD-SCDMA, WiMAX, and LTE TDD base OUT 1 IN 1 stations On/off switching in land mobile radios and military communications systems IN 2 OUT 2 High power series diodes S3109 Features Figure 1. SKY12213-478LF Block Diagram High power handling: 150 W CW Low insertion loss: 0.5 to 1.0 dB typical Description High isolation: 23 dB typical The SKY12213-478LF is a high power handling, Single-Pole, Controlled with positive power supply Single-Throw (SPST) silicon PIN diode switch. The device operates over the 0.5 GHz to 6.0 GHz band. It features low Small, QFN (16-pin, 4 x 4 mm) Pb-free package (MSL1, 260 C insertion loss, excellent power handling, and superb linearity with per JEDEC J-STD-020) low DC power consumption. Skyworks Green products are compliant with The SKY12213-478LF is well-suited for use as a high power SPST all applicable legislation and are halogen-free. switch in a variety of telecommunication systems such as WiMAX, For additional information, refer to Skyworks TD-SCDMA, or LTE base stations. It can also be used as a high Denition of Green, document number power series diode in a multitude of PIN diode applications. SQ04-0074. The device is provided in a 4 x 4 mm, 16-pin Quad Flat No-Lead (QFN) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. 16 15 14 13 1 12 GND GND IN 1 2 11 OUT 1 3 10 IN 2 OUT 2 4 9 GND GND 5 6 78 S3105 Figure 2. SKY12213-478LF Pinout 16-Pin QFN (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 202180D Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice January 27, 2014 1 N/C N/C N/C N/C N/C N/C N/C N/CDATA SHEET SKY12213-478LF HIGH POWER PIN DIODE SPST SWITCH Table 1. SKY12213-478LF Signal Descriptions Pin Name Description Pin Name Description 1 GND Ground. Must be connected to ground using 9 GND Ground. Must be connected to ground using lowest possible impedance. lowest possible impedance. 2 IN 1 Input RF port 1 and DC bias input port. 10 OUT 2 Output RF port 2 and DC bias input port. 3 IN 2 Input RF port 2 and DC bias input port. 11 OUT 1 Output RF port 1 and DC bias input port. 4 GND Ground. Must be connected to ground using 12 GND Ground. Must be connected to ground using lowest possible impedance. lowest possible impedance. 5 N/C No connection 13 N/C No connection 6 N/C No connection 14 N/C No connection 7 N/C No connection 15 N/C No connection 8 N/C No connection 16 N/C No connection Table 2. SKY12213-478LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units RF CW input power input ports (TSUBSTRATE = 25 C) PIN 190 W RF peak input power input ports (TSUBSTRATE = 25 C, RF burst PIN 760 W width = 10 s, RF burst repetition rate = 25 kHz) Control port reverse voltage VCTL 200 V Control port forward current ICTL 200 mA Operating temperature TOP 55 +175 C Storage temperature TSTG 55 +200 C Electrostatic discharge: ESD Charged Device Model (CDM), Class 4 1000 V Human Body Model (HBM), Class 2 2000 V Machine Model (MM), Class B 200 V Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. Recommended Operating Conditions Parameter Symbol Min Typical Max Units Control port forward voltage VCTL 0 +28 +100 V Control port reverse voltage VCTL 100 28 0 V Control port forward current ICTL 50 100 100 mA Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 January 27, 2014 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 202180D