DATA SHEET SMP1304 Series: Low-Distortion Attenuator Plastic Packaged PIN Diodes Applications TV distribution Attenuator circuits Features Low-distortion design Frequency range from 5 MHz to >2 GHz Designed for base station applications Configured for PI and TEE attenuators Packages rated MSL1 260 C per JEDEC J-STD-020 Description The SMP1304 series of plastic packaged, surface mountable, low TM capacitance (0.3 pF) silicon PIN diodes is designed for attenuator Skyworks Green products are compliant with applications from 5 MHz to beyond 2 GHz. all applicable legislation and are halogen-free. For additional information, refer to Skyworks The thick 100 m I region of these PIN diodes makes them very TM Denition of Green , document number attractive for use in low-distortion PI and TEE attenuators SQ040074. commonly found in TV distribution applications. The 1 s typical carrier lifetime of these diodes results in a resistance of 20 maximum at 1 mA and 7 maximum at 10 mA. The SMP1304 series is available in a selection of plastic packages: as a single diode in small footprint and SC-79 packages, and in a variety of configurations in an SOT-23 package. The SMP1304-027 is available in an SOT-5 package as a four-diode array designed for insertion in commonly used four- diode PI attenuator circuits. Table 1 describes the various packages and marking of the SMP1304 series. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200044Q Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice July 1, 2016 1 DATA SHEET SMP1304 SERIES Table 1. SMP1304 Series Packaging and Marking Series Pair Reverse Series Pair PI Single SC-79 SOT-23 SOT-23 SOT-5 Green SMP1304-005LF SMP1304-006LF SMP1304-027LF SMP1304-079LF Green Green Green Marking: Cathode and C4 Marking: RG2 Marking: RG8 Marking: RGM LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 0.7 nH The Pb-free symbol or LF in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Electrical and Mechanical Specifications Package and Handling Information The absolute maximum ratings of the SMP1304 series are Instructions on the shipping container label regarding exposure to provided in Table 2. Electrical specifications are provided in moisture after the container seal is broken must be followed. Table 3. Resistance versus temperature measurements are Otherwise, problems related to moisture absorption may occur provided in Table 4. when the part is subjected to high temperature during solder assembly. Typical performance characteristics of the SMP1304 series are illustrated in Figures 1 to 4. Package dimensions are shown in The SMP1304 series is rated to Moisture Sensitivity Level 1 Figures 5 to 9 (odd numbers), and tape and reel dimensions are (MSL1) at 260 C. It can be used for lead or lead-free soldering. provided in Figures 6 to 10 (even numbers). For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 July 1, 2016 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200044Q