CENB1040 Universal 40 Watt Series ITE Switch-Mode Power Supply 3 Year Warranty 100-240VAC Universal Input Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II Desktop Style Limited Power Source Certified to UL/EN60950-1, 2nd Edition 5V to 48V Single Output Models, up to 40W Modified and Custom Designs Available Regulated Output with Low Ripple No Load Power Consumption <0.3W Impact-Resistant Polycarbonate Enclosure LPS RoHS Specifications All Specifications are typical at nominal input, full load at 25 C unless otherwise stated. MTBF >100,000 hours (calculated) AC Input 100-240VAC, -/-10%, 47-63 Hz, 1 Input Current 100VAC: 1.1A Hold-up Time 18 ms min. 115Vac, 60 ms 230 Vac Inrush Current 60 A peak, 264 V, cold start Overload Protection Hiccup Mode Input Fuse 3.15A, 250V Internal Primary Current Fuse is provided Short Circuit Protection Hiccup Mode Efficiency Meets EISA2007, CEC Efficiency Level V, Topology Switching Fixed Frequency Flyback EU (EC) No 278/2009 Phase II nd Output Voltage See chart Safety Standards EN/IEC/CSA/UL60950-1, 2 Edition, LPS Output Power See chart EMC See chart below Ripple and Noise 1% pk-pk max., 20MHz BW Dielectric Withstand Input-Output: 4,242Vdc Input-GND: 1,500 Vac, Output-GND: 500Vdc Line & Load Voltage Regulation Line: +/- 1%, Load: +/-5% Operating Temperature 0 to 40C, no derating Transient Response 500s max., 50% load step, typical Storage Temperature -30 to +85 C Minimum Load Not required Relative Humidity 5% to 95%, non-condensing Case Material Black 94V0 Polycarbonate Altitude 0 to 10,000 ft Case Dimensions 102 x 60 x 32mm. See outline drawing Output Cable 18AWG (UL1185), 1,500mm, 2 conductor Weight 250g Output Connector 2.5mm barrel type (Ault 3), center positive (+) EMC Specifications Conducted Emissions EN55022 Class B, FCC Part 15, Class B. Radiated Emissions EN55022 Class B, FCC Part 15, Class B. Line Frequency Harmonics EN61000-3-2, Class A Voltage Fluctuations/Flicker EN61000-3-3 Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11, Criteria B 1 of 2 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info slpower.com www.slpower.comCENB1040 Universal 40 Watt Series ITE Switch Mode Power Supply 3 Year Warranty Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) CENB1040A0503F01 5 V 5.00 A 25.0 W 50mV CENB1040A0903F01 9 V 4.00 A 36.0 W 90mV CENB1040A1203F01 12 V 3.40 A 40.8 W 120mV CENB1040A1503F01 15 V 2.76 A 40.5 W 150mV CENB1040A1803F01 18 V 2.20 A 39.6 W 180mV CENB1040A2403F01 24 V 1.70 A 40.8 W 240mV CENB1040A4803F01 48 V 0.83 A 39.8 W 480mV Notes: Part numbers above include 3 output connector and IEC320 C14 grounded input receptacle. See below for other options. Model Number Key CENB 1 040 A VV 03 F 01 Model01 = Standard.02 and higher indicates a modified model. Input Connector: = IEC320 C14 grounded, Other options available, see next page. Output Connector:03 = 2.5mm Barrel Type Connector. Other options available, contact factory. Output Voltage:05 = 5Vdc,12 = 12Vdc,24 = 24Vdc, etc. Model = Original Configuration Output Power:040 = 40 Watts of Outputs1 = Single Output Product Family: = Commercial/ITE/Industrial, = External,N = Model Series Designator Input Receptacle Options Output Connector IEC320 - C14 IEC320 - C18 IEC320 - C8 Class I Class II Class II Grounded (F) Ungro unded (Q)Shave (N) Outline Drawing 60 31.5 102 1200 +/-25 Dimensions are in mm Data Sheet 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 10-30-2014 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. 2 of 2 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info slpower.com www.slpower.com