CENB1090
Universal Input 90 Watt Series
ITE Switch-Mode Power Supply 3 Year Warranty
100-240VAC Universal Input
Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
Desktop Style
12V to 48V Single Output Models, up to 90W
Modified and Custom Designs Available
Regulated Output with Low Ripple
Impact-Resistant Polycarbonate Enclosure
No Load Power Consumption <0.5W
nd
Meets UL/EN/IEC60950-1, 2 Edition
RoHS
Specifications All Specifications are typical at nominal input, full load at 25C unless otherwise stated.
AC Input 100-240VAC, +/-10%, 47-63 Hz, 1 MTBF >100,000 hours (calculated)
Input Current 100Vac: 2.0A Hold-up Time 18 ms min. @ 115Vac, 60 ms min. @ 230 Vac
Inrush Current 60A peak @ 264Vac Overload Protection Hiccup Mode
Input Fuse 3.15A, 250V Internal Primary Current Fuse is provided Short Circuit Protection Hiccup Mode
Efficiency Meets International Efficiency Level V Topology Switching Fixed Frequency Flyback
nd
Output Voltage See chart Safety and EMC Approvals EN/IEC/CSA/UL60950-1, 2 Edition
EMC: See chart
Output Power See chart Dielectric Withstand Input-Output: 4,242Vdc
Input-GND: 1,500 Vac, Output-GND: 500Vdc
Ripple and Noise 1% pk-pk max., 20MHz BW
Operating Temperature 0 to 40C, no derating
Line/Load Regulation Line: +/- 1%, Load: +/-5%
Storage Temperature -30 to +85C
Transient Response 500s max., 50% load step, typical Relative Humidity 5% to 95%, non-condensing
Minimum Load Not required Altitude 0 to 10,000 ft
Case Material Black 94V0 Polycarbonate Output Connections Cable: 18AWG, 1,500mm, 4 conductor
Connector: Ault #3, 2.5mm barrel or #51, 6-pin Molex. See drawings.
Case Dimensions 129 x 77 x 40mm. See outline drawing Weight 600g
EMI/EMC Compliance
Conducted Emissions FCC Part 15, Class B, EN55022 Class B, EN55024
Radiated Emissions FCC Part 15, Class B, EN55022 Class B, EN55024
Voltage Fluctuations EN61000-3-3, Line Flicker
Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
Radiated RF Immunity EN61000-4-3, 3V/m.
EFT/Burst Immunity EN61000-4-4, 2kV/5kHz..
Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode
Conducted RF Immunity EN61000-4-6, 3Vrms
Power Frequency Magnetic Field Immunity
EN61000-4-8, 3A/m
Voltage Dip Immunity EN61000-4-11 crit. A, 100Vac 60Hz, 40%/5 cycles with 70% full load.
Line Frequency Harmonics EN61000-3-2, Class A
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com
CENB1090
Universal Input 90 Watt Series
ITE Switch-Mode Power Supply 3 Year Warranty
Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max)
CENB1090A1251F01 12 V 7.0 A 84.0 W 120mV
CENB1090A1503F01 15 V 6.0 A 90.0 W 150mV
CENB1090A1803F01 18 V 5.0 A 90.0 W 180mV
CENB1090A2403F01 24 V 3.75 A 90.0 W 240mV
CENB1090A4803F01 48 V 1.9 A 90.0 W 240mV
Model Number Key
CENB 1 090 A VV 03 F 01
Model01" = Standard. 02" and higher indicates a modified model.
Input Connector: = IEC320 C14 grounded, Other options available, see below
Output Connector:03" = 2.5mm Barrel Type Connector,51" = 6 pin Molex. Other options available.
Output Voltage:05" = 5Vdc,12" = 12Vdc,24" = 24Vdc, etc.
Model = Original Configuration
Output Power:090" = 90 Watts
# of Outputs1" = Single Output
Product Family: = Commercial/ITE/Industrial, = External,N = Model Series Designator
Input Receptacle Output Connector Output Connector (12V models)
IEC320 C14 - Class I
Grounded (F)
#3 Connector is 2.5mm barrel type, center (+) #51 Connector is Molex 39-01-2060 or equivalent.
51" Connector Pinout: Pins 1, 4: (+), Pins 3, 6: (-). Mate = Molex 39-01-2061 or equiv.
Outline Drawing
DIN connector
shown. Standard
connector is either
#3 or #51
connector. See
above.
Dimensions are in mm
Data Sheet 2011 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 4-25-2011
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
______________________________________________________________________________________________________________________________ 2 of 2
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com