LE200S-CD 200W Single Output LED Driver Series Features High Efficiency (up to 93%) Wide Range Universal Input 90-305 VAC Active Power Factor Correction (0.99 typical) Constant Current Output Dimming Function Lightning Protection Waterproof (IP67) Overcurrent, Overvoltage, Overtemperature Protection Meets UL8750 & EN61347 Safety 3 Year Warranty Description The LE200S-CD Series operate from a 90 ~ 305Vac input range. These units will provide up to a 0.7A of output current and a maximum output voltage of 285Vdc for 200 W maximum output power. They are designed to be highly efficient and highly reliable. The standard features include dimming control, lightning protection, over voltage protection, short circuit protection, and over temperature protection. Model Selection Model Output Output Efficiency* Ripple & Regulation Overvoltage Number Current Voltage 110Vac 220Vac Noise** Line Load Trip Level LE200S70CD 665mA-735mA 143V 285V 90%-91% 92%-93% 8.6V pk-pk max. 1% 3% 342V 428V Notes: 1. Efficiency measured at full load, at input voltage noted. 2. Measured at 20MHz bandwidth, with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR electrolytic capacitors. General Specifications AC Input 90-305Vac, 47-63Hz, 1 Turn On Time 1.0 seconds, max. Constant Current 100Vac: 2.4A, 220Vac: 1.2A Overload Input Current Protection Dimming 1-10Vdc source or External Resistor can be Inrush Current 230Vac, cold start: will not exceed 65A used for dimming control. See below. Function Input Fuses XA, 250VAC fuses provided on all models www.slpower.com LE200S-CD REV 2.0,11-FEB-13 1 LE200S-CD 200W Single Output LED Driver Series General Specifications (continued) Earth Leakage Short Circuit <0.75mA 277Vac, 50Hz Provided - no damage to unit, self-recovery. Current Protection Latch mode. AC input will need to be reset to Overvoltage Efficiency See Models chart. return to normal operation after an OVP Protection condition. See chart for trip range. Latch mode. AC input will need to be reset to Overtemperature 200W continuous return to normal operation after an OTP Output Power Protection condition. Trip Temperature = 110C typical. Operating Operating: -35C to +70C Ripple and Noise See chart Temperature Non-operating: -40C to +85C 10% to 100% operating Output Voltage See chart Relative Humidity 5% to 100%, non-operating UL8750, UL935, UL1012, CSA-C22.2 No. 107.1, Total Regulation +/- 3%. See chart Safety Standards EN61347-1, EN61347-2-13 330,000 hours (450mA model, 110Vac input, Dimensions W: 3.13 x L: 9.37 x H: 1.81 MTBF 80% load, 25C ambient, per MIL-HDBK-217F). 90,000 hours (1400mA model, at 110Vac input, Weight 1500g Lifetime 80% load, 45C ambient temperature). EMI/EMC Compliance EN55015, Radiated & Conducted with 6db of margin Emissions EN61547 EMI for Lighting Equipment Static Discharge Immunity EN61000-4-2, 4kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3 EFT/Burst Immunity EN61000-4-4 Line Surge Immunity EN61000-4-5, 4kV line-line, 6kV line-earth Conducted RF Immunity EN61000-4-6 EN61000-4-8 Power Frequency Magnetic Field Immunity Voltage Dip Immunity EN61000-4-11 Line Harmonic Emissions EN61000-3-2 Flicker Test EN61000-3-3 www.slpower.com LE200S-CD REV 2.0,11-FEB-13 2