225W Single Output LU225 Family LED & Industrial Grade FEATURES AND BENEFITS LED 2.2 x 4.16 x 1.5 Package (Standard) Universal Input 90-305Vac Industrial Single Output UL8750 EN55015 (EN55032) Class B Conducted EMI 0.5W Power Consumption at No-load 225 Watts (Fan Cooled, 200 LFM) Active Inrush Current Limiter 15A Approved to EN/CSA/IEC/UL62368-1 180 Watts (Conduction Cooled) 150 Watts (Convection Cooled) MODEL SELECTION Ripple & Total Model Number* Volts Output Current Convection Threshold 1 Noise Regulation w/200LFM air Conduction LU225S12K 12V 17.5A 13.3A 11.67A 1% 2% 14.1 1.0V LU225S24K 24V 9.38A 7.50A 6.25A 1% 2% 27.6 1.0V LU225S36K 36V 6.25A 5.00A 4.16A 1% 2% 39.8 1.0V LU225S48K 48V 4.69A 3.75A 3.125A 1% 2% 55.2 2.0V LU225S56K 56V 4.00A 3.2A 2.68A 1% 2% 64.3 2.0V *Replace K in the model number with KL for top mount Version. Example: LU225S56KL. INPUT OUTPUT Output Voltage See model chart AC Input 100-277Vac, 10%, 47-63Hz, 1 Output Power 225 Watts max. with 200 LFM Input Current Max. 115Vac: 2.8A, 277Vac: 1.3A Turn On Time Less than 1 sec. 115Vac, Full Load < 15A peak, 277Vac, cold start, turn on at AC zero Hold-up Time 12 mSec min, 115Vac/60Hz Inrush Current crossing Ripple and Noise 0.5%rms, 1% pk-pk, see chart Input Fuses provided on all models Total Regulation +/- 3% combined line, load and initial setting PFC: Variable 40 -150kHz Earth Leakage Current <500A 277Vac, 60Hz, NC Switching Frequency Main Converter: Variable 35-200kHz, 65-70kHz VIN 12V & 24V 36V, 48V & 56V at full load (Vac) ----------- ----------- Efficiency For 5% to 50% or 50% to 5% load change: <20 mSec, 115 88% 90% return to 1% of nominal, i/t <0.2A/uS Max voltage 277 90% 92% deviation=3% For 50% to 100% or 100% to 50% load change: <1 The specification above is based on 25C ambient and where applicable at nominal input Transient Response mSec, return to 1% of nominal, i/t<0.2A/uS Max voltage of 100 to 277VAC. voltage deviation=3% For 5% to 100% or 100% to 5% load change: 25 mSec, return to 1% of nominal, i/t <0.2A/uS Max voltage deviation=4% Voltage Adjustability +/- 5% Minimum Load Not required The specification above is based on 25C ambient and where applicable at nominal input voltage of 100 to 277VAC. LU225 Family Datasheet v1020 Copyright 2020 SL Power Electronics Corp. All rights reserved. Page 1225W Single Output LU225 Family LED & Industrial Grade SAFETY ISOLATION Approved to EN/CSA/IEC/UL62368-1 Input-Output: 3,000Vac Safety Standards Isolation Input-Ground: 1,800Vac Output-Ground: 500Vac Operating: Half-sine, 20gpk, 10ms, 3 axes, 6 shocks The specification above is based on 25C ambient and where applicable at nominal input total Drop Test voltage of 100 to 277VAC. Non-Operating: Half-sine, 40 gpk, 10 ms, 3axes, 6 shocks total The specification above is based on 25C ambient and where applicable at nominal input voltage of 100 to 277VAC. ENVIRONMENT EMI/EMC COMPLIANCE -10C to +70C (See Below Chart) EN55015 (EN55032) Class B, FCC Part 15, Operating Temperature Conducted Emissions Start Up at -40C Subpart B, Class B Heat - Sink To maintain Safety approval & life expectancy, heat- EN55022 (EN55032) Class A, FCC Part 15, Temperature sink temperature should not exceed 85C Subpart B, Class A with 8dB Margin. Addition Radiated Emissions of cores on external wiring will help the system Storage Temperature -40C to +85C pass class B (Application notes are available) Relative Humidity 5% to 95%, non-condensing EMI for Lighting Equipment 370g EN61000-4-2, 6kV Contact Discharge, 8kV Weight Static Discharge Immunity H option: TBD air discharge Standard W:2.2 x L: 4.1 x H:1.5 Radiated RF Immunity EN61000-4-3, 3V/m Dimensions L option: W:2.2x L:4.81 x H:1.5 EFT/Burst Immunity EN61000-4-4, 2kV/5kHz Operating: -457 to 3000 m Altitude Non-operating: -457 to 12,192m EN61000-4-5, 1kV differential, 2kV Line Surge Immunity common-mode Operating: 0.003g/Hz, 1.5grms overall, 3 axes, 1 hr/ axis Conducted RF Immunity EN61000-4-6, 3Vrms Vibration Non-Operating: 0.026g/Hz, 5.0grms overall, 3 axes, Power Frequency Magnetic 10 min/axis EN61000-4-8, 3A/m Field Immunity EN61000-4-11, 100%, 10ms 30%, 500ms Voltage Dip Immunity 60%, 100ms Performance Criteria A, A, & A at 58% load EN61000-3-2, Class A, D Line Harmonic Emissions For Class C from 1W input power to full load by 10% increment Flicker Test EN61000-3-3, Complies (dmax<6%) The specification above is based on 25C ambient and where applicable at nominal input voltage of 100 to 277VAC. LU225 Family Datasheet v1020 Copyright 2020 SL Power Electronics Corp. All rights reserved. Page 2