PW130
POE INJECTOR
IEEE 802.3af COMPLIANT
PW130 POWER OVER
PW130
ETHERNET (POE)
Max Max
Nominal Continuous Continuous
UNIVERSAL INPUT
Ault Part No. Voltage DC Amps Watts
PW130RB4800_01 48V 0.35* 15.4*
Self-contained Power Injector up to 15W
*Per conditions of IEEE 802.3af
100-250 VAC Universal Input
Desktop Style, Single Output
Ault Part No. Key
Ideal for Midspan Applications
PW130 R B 48 00 _ 01
Regulated Output With Low Ripple
Product Manufacturing Design Voltage Connector Input Standard (no
Family Location Revision DC Configuration/modifications,
Name (volume Changes Model Type Mode Type or special
Meets Safety Agency Requirements
dependent) (see pg. 2) packaging)
Complies With EMI/RFI Regulations
Detection Collision Avoidance LED Key
Power Mode LED Amber - Power On/Detection Mode
CE Compliant
(Two colors) Green - Injecting Full Power/Power Up Mode
Private Label Marking Available
Stand By Mode LED Green - Power Supply is On
(Single color)
1 Year Warranty
Modified and Custom Designs Also Available
AULT INCORPORATED
7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900
FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com
Copyright 2004 Ault Inc.PW130
POE INJECTOR
IEEE 802.3AF COMPLIANT
Input Safety Approvals
Voltage 100-250 VAC -10%, +6% Agency Listings cULus: UL/CSA60950; TUV: EN60950; CE:
LVD, EMCD
Line Frequency 47 - 63 Hz Current 0.5A max. at 90
VAC input
Protection Internal primary current fuse, Electrical
Inrush limiting
Topology Switching - Fixed frequency flyback
Configuration Inlet type : IEC320-C14; IEC320-C8
Dielectric Withstand 3000 VAC, 4250 VDC primary- secondary
500 VDC secondary-ground
Output Spacing 6.4mm primary-secondary
Combined Line and 1% excluding cord Leakage Current Less than 750 uA
Load Voltage Regulation
Efficiency Minimum 65%
Ripple 1% V p-p max for output current of
EMI Complies with EMC Directives
>0.175A
CE CE Compliant
Transient Response 0.5 msec. for 50% load change typical
MTBF 100,000 Calculated Hours
Holdup Time 18 msec min. @120 VAC
60 msec min. @240 VAC
Protection Overcurrent protection
Environmental
Short circuit protection
IEEE 802.3af load detection logic
Operating Temperature 0 to 40C with no derating
Cord and Connector Dual RJ45 jacks built into the enclosure
Storage Temperature -30 to +85C
Relative Humidity 5% to 95% non-condensing
Altitude 0-10,000 feet
Cooling Convectional - non vented case
Mechanical
Case Dimensions 107.9L x 66.5W x 38.6H (mm)
87654321 87654321
Case Material Black, 94V0 Polycarbonate
J1 J2
(Power and Data Out) (Data In)
Weight 7 Ounces, 198 grams
(Rear of Unit)
J1 pins J2 pins
11
Input Configuration
22
33
4 +power 4 no connection
5 +power 5 no connection
IEC320
Shaver
w/ground
66 C8
C14
(N)
7 power 7 no connection
(F)
8 power 8 no connection
Specify the Input Configuration Code in your order.
Note: indicates connections between J1 and J2
AULT INCORPORATED
7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900
FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com
Copyright 2004 Ault Inc.