PW153KB1203F01 SL Power

PW153KB Universal 40 Watt Series ITE / Switch Mode Power Supply 100-240 VAC Universal Input Desktop Style Single Output to 40W Five Models Available 12V to 48V Regulated Output with Low Ripple Impact Resistant Polycarbonate Enclosure Modified and Custom Designs Also Available Designed to Meet EISA Requirements see reverse side for details International Safety Standard Approvals Specifications Output Specifications General Specifications Line and Load Line Voltage +/-1% Topology Switching-Fixed Regulation(Excluding cord) LoadV oltage +/-5% FrequencyFlyback Ripple 1%Vp-p max. Efficiency Designed to Meet EISA Requirements see TransientResponse 0.5ms for 50% reverse side Load changeT ypical Hold-up Time 120VAC 18msmin. Protection Over-currentProtection 240VAC 80ms min. (Hiccup) Short CircuitProtection Dielectric Withstand 3,000VAC or 4,250VDC Primary-Secondary 1,500VACor 2,150VDC Input Specifications Primary-F.G. 500VDC Secondary-F.G. InputV oltage Range Universalinput 100-240VAC -10%,+10% StorageT emp -30C to 85 C LineFrequency 47-63Hz Approvals and UL60950-1, Input Current 90VACInput 1.2A max. SafetyStandards IEC/EN60950-1 Protection InternalPrimary EMC: EN55022/55024/61000 Current Fuse, MTBF 100,000 Calculated Hours InrushLimiting Case andDimension Desktop style 3.98L x2.4W x1.34H (in) Environmental Specifications 101.0L x 61.0W x 34.0H (mm) Case Material Black 94V0 Thermal Performance Operating temperature 0 C to40 C Polycarbonate full load, no derating convectionalcooling Cordand Connectors 18A WG 1,800mm Non vented case 2 Conductor. Ault 3 Connector. Other connectors Relative Humidity Non-condensing 5% to 95% are alsoavailable. Altitude 0-10,000 feet SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone:805.486.4565 Fax:858.712.2040 Email:info slpower.com www.slpower.comPW153KB Universal 40 Watt Series For the most current data and application support visit www.slpower.com ITE / Switch Mode Power Supply Output Current Output Max Ripple Ault Part Number Voltage Max Watts Vp-p max. PW153KB12XX 12 V 3.40 A 40.8 W 120 mV PW153KB15XX 15 V 2.70 A 40.5 W 150 mV PW153KB18XX 18 V 2.20 A 40.0W 180 mV PW153KB24XX 24 V 1.70 A 40.8W 240 mV PW153KB48XX 48 V 0.83 A 39.8 W 480 mV Ault Part Number Key Pin Connections PW153 K B 12 XX Product Manufacturing Design Voltage Connector Family Location Revision DC Number Name Changes Input Configuration PinoutCode Center contact:positive IEC320 N. America/ IEC320 Europe United Australian Shaver w/ground w/o ground Japan (M) (E) C8 Description Switchcraft 760plug or equivalent Kingdom C14 C18 (B) (N) (G) (F) (Q) SuggestedMating Switchcraft 712A jack or equivalent Specifythe Input Configuration Code inyour order . Other Connectorsare available by special order. 2007 Energy Independence and Security Act EISA T he Energy Independence and Security Act of 2007 was passed in December of2007 and addresses minimum efficiency standards andstandby levels forClass A external power supplies thatare 250 watts and under . Thislaw stipulates that external power suppliesmanufactured on July1, 2008 and beyondmeet certain minimum efficiencyand standby criteria as defined below. MinimumEfficiency Criteria Active mode is defined as when a power supply sinput is connected to line voltageAC and its output is connectedto a DC or AC load drawing a portion of theproduct spower output. Depending onthe power rating for the power supply, itmust meet the minimum efficiency criteria outlined below. Energy-EfficiencyCriteria for Active Mode: outputpower on minimum average adapter label efficiency percentage 0to less than 1 watt 0.50 *output power on adapter label >1 to 51 watts 0.09 * Ln (output power on adapter label) + 0.50 >51 watts 0.85 The powersupply must also meet arequirement for when its input is connected to a line voltageAC but its output isnot connected to a load. Depending on the power outputof the supply ,it mustkeep its energy consumption below the followingvalues. Energy Consumption Criteria forNo Load Mode: output power on maximum power consumption adapterlabel in no-load mode 0to < 250watts 0.5 watts SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone:805.486.4565 Fax:858.712.2040 Email:info slpower.com www.slpower.com Data Sheet 2008 SL Power Electronics Corp.The information and specifications contained in this data sheetare believed to be correct at time ofpublication. However, SLPower acceptsno responsibility for consequences arising from reproduction errorsor inaccuracies. Specifications are subject to changewithout notice. Rev.06/3/08