TE150A4803F01 TE150A4803N01 TE150A4803Q01 150W Single Output 150W Single Output TE150 Family TE150 Family Industrial Grade Industrial Grade FEATURES AND BENEFITS Compact Size: 6.5 x 2.8 x 1.5 Meets EN55015/CISPR15, CISPR22, CISPR32, Industrial FCC Part 15.109 Class B Conducted & Meets DoE Efficiency Level VI and EU CoC Radiated Emissions, with 6db Margin Version 5, Tier 2 Requirements Approved to EN/CSA/IEC/UL62368-1 No Load Input Power Average Efficiency 3 Year Warranty Up to 150W of AC-DC Power RoHS/REACH Compliant >10 Years E-Cap Life Blue LED Indicator Universal Input Range 90-264Vac IP22 Rated Enclosure MODEL SELECTION Output Output Ripple & Line Load Output Cable Input Volts Model Number 1 Current Power Noise Regulation Regulation & Connector Configuration TE150A1251F01 12.0V 12.5A 150W 120mV pk-pk 1% 5% 2 6 pin Molex Type TE150A1551F01 15.0V 10.0A 150W 150mV pk-pk 1% 5% Class I Desktop, TE150A1851F01 18.0V 8.33A 150W 180mV pk-pk 1% 5% IEC60320 C14 Receptacle 2.5 x 5.5 x 9.5mm Str. Barrel TE150A2451F01 24.0V 6.25A 150W 240mV pk-pk 1% 5% Type, center (+) 48.0V 3.20A 150W 480mV pk-pk 1% 5% TE150A1251N01 12.0V 12.5A 150W 120mV pk-pk 1% 5% 2 6 pin Molex Type TE150A1551N01 15.0V 10.0A 150W 150mV pk-pk 1% 5% Class II Desktop, TE150A1851N01 18.0V 8.33A 150W 180mV pk-pk 1% 5% IEC60320 C8 Receptacle 2.5 x 5.5 x 9.5mm Str. Barrel TE150A2451N01 24.0V 6.25A 150W 240mV pk-pk 1% 5% Type, center (+) 48.0V 3.20A 150W 480mV pk-pk 1% 5% TE150A1251Q01 12.0V 12.5A 150W 120mV pk-pk 1% 5% 2 6 pin Molex Type TE150A1551Q01 15.0V 10.0A 150W 150mV pk-pk 1% 5% Class II Desktop, TE150A1851Q01 18.0V 8.33A 150W 180mV pk-pk 1% 5% IEC60320 C18 Receptacle 2.5 x 5.5 x 9.5mm Str. Barrel TE150A2451Q01 240mV pk-pk 1% 5% 24.0V 6.25A 150W Type, center (+) 48.0V 3.20A 150W 480mV pk-pk 1% 5% 1. Measured at the output connector, with noise probe directly across output and load, terminated with 0.1F ceramic and 47F low ESR capacitors. Notes: 2. Molex p/n 39-01-2060 or equivalent. See outline drawing for pinout information. 3. For Input Class I models: For AC GND connected to output common (-), insert a B in the part number where the A is located (TE120B1251F01). 4. All specifications are typical at nominal input, full load, at 25C ambient unless noted. TE150 Family Datasheet v0621 Copyright 20 21 SL Power Electronics Corp. All rights reserved. Page 1 TE150 Family Datasheet v0819 Copyright 2019 SL Power Electronics Corp. All rights reserved.150W Single Output 150W Single Output 150W Single Output TE150 Family TE150 Family TE150 Family Industrial Grade Industrial Grade Industrial Grade INPUT OUTPUTOUTPUT 100-240Vac, 10%, 47-63Hz, 1 AC Input Hold-Up Time 20mS min., at full Load, 100Vac input Turn On Time Input Current 115Vac: 1.6A, 230Vac: 0.8A Less than 1 sec 115Vac, full load Inrush Current 230Vac, cold start: will not exceed 70A pk 150W continuous See models chart for specific Output Power voltage model ratings F1, F2: 3.15A/250Vac fuses (line & neutral lines) Input Fuses provided on all models Output Voltage See models chart on pg 1 Input-GND: <500A 264Vac, 60Hz, NC Output-GND: Ripple and Noise See models chart on pg 1 Leakage Current <4mA 264Vac, 60Hz, NC Enclosure Leakage: TBDuA 500s response time for return to within 0.5% of Meets US DoE Efficiency Level VI, EU CoC Version 5, final value for any 50% load step over the range Efficiency Transient Response Tier 2 average efficiency levels of 5% to 100% of rated load, i/t<0.2A/s. Max voltage deviation is +/-3.5% of final value No Load Input <0.150W surpassing DoE Efficiency Level VI and EU Power CoC Version 5, Tier 2 Requirements RELIABILITY PROTECTION >250,000 hours, full load, 115 & 230Vac input, MTBF 25C amb., Telcordia SR-332 Issue 3 Will shutdown upon an over-temperature condition, Overtemperature auto-recovery Protection >10 year life based on calculations at 115Vac/60Hz & 230Vac/50Hz, ambient 25C at Overload Protection 130 to 180% of rating, Hiccup Mode E-Cap Life 24 hrs per day, 365 days/year, 6 power up cycles Short Circuit per day. (80% load on 12V models) Hiccup Mode, auto recovery Protection Overvoltage 115 to 130% of output voltage (max. 60V on 48V Protection model), latching, recycle AC power to recover ENVIRONMENT Operating -20C to +70C. Derate above 50C Ripple & Noise = 2% from -20C to 0C Temperature SAFETY Temperature Derating Derate output power above 40C to TBD at 50C Storage Temperature Safety Standards -40C to +85C EN/CSA/IEC/UL62368-1 Operating: to 5000m (derate to TBD temp. above Operating: Half-sine, 20gpk, 10mS, 3 axes, 6 shocks Altitude 3000m) total Non-operating: -500 to 40,000 ft. Shock Non-Operating: Half-sine waveform, impact acceleration of 50G, Pulse duration of 6 mS Relative Humidity 5% to 95%, non-condensing Number of shocks: 3 for each of the three axis 1.4m from table top to wooden platform, 5 faces Operating: 0.003g/Hz, 1.5grms overall, 3 axes, Safety Drop Test 10min/axis, 1-500Hz. Non-Oper.: random (face with the output cord not needed) waveform, 3 minutes per axis, 3 axes and Sine Vibration waveform, Vib. frequency/acceleration: 10-500Hz/1g, sweep rate of 1 octave/minutes, Vibration time of 10 sweeps/axes, 3 axes ISOLATION SPECIFICATIONS Case Temperatures are within regulatory guidelines Input-Output: 3,000Vac Care should be taken to avoid prolonged contact Case Temperature Input-Ground: 1,500Vac Isolation with skin or other heat sensitive surfaces Output-Ground: 500Vac Dimensions W: 6.49 x L: 1.45 x H: 2.83 Case Weight 700g Notes: All specifications are typical at nominal input, full load, at 25C ambient unless noted. TE150 Family Datasheet v0819 Copyright 2019 SL Power Electronics Corp. All rights reserved. TE150 Family Datasheet v0621 Copyright 20 21 SL Power Electronics Corp. All rights reserved. Page 2 TE150 Family Datasheet v0819 Copyright 2019 SL Power Electronics Corp. All rights reserved.