P0644-P0676-E.qxd 08.8.27 6:14 PM Page 652 Pressure Gauge with Limit Indicator/ Color Zone Type Series G36-L/G46-L Red and green zones offer improved visibility of pressure control range. G36-10-01-L G46-10-02-L Green indicator Indicator adjusts to highlight preferred range. Red indicator Standard Specifications Model G36-L G46-L Type Back side thread (1) Port size R 1/8 R 1/8, R 1/4 (2) Fluid Air (3) Indication precision 3% F.S. (Full span) Case Rolled steel (Black melamine painted) (Surface treatment) Polycarbonate (Part no.: G36-00-00-3) Polycarbonate (Part no.: G46-00-00-3) Clear cover Material Nylon (Part no.: G36-00-00-3N) Nylon (Part no.: G46-00-00-3N) Brass Stud Bourdon tube Brass Mass (kg) 0.04 0.05 Note 1) When mounting a pressure gauge, use caution not to tighten excessively. Excessive tightening will cause product to be damaged. Use a pipe tape for sealing. Recommended tightening torque: R 1/8: Set between 7 and 9 Nm, R 1/4: 12 and 14 Nm respectively. Note 2) When using other fluids, please consult with SMC for fluid compatibility information concerning corrosive potential. Note 3) Temperature conditions: at 20C (5C), in other cases, 6C F.S. Model (Standard) (1) Pressure range Green zone setting range Indication Connection Model Note unit thread MPa Minimum setting range (MPa) Maximum setting range (MPa) G36-2-01-L 0 to 0.2 0.01 0.1 G36-4-01-L 0 to 0.4 0.02 0.2 R 1/8 G36-10-01-L 0 to 1.0 0.05 0.5 MPa G46-2-01 to 02-L 0 to 0.2 0.01 0.1 G46-4-01 to 02-L 0 to 0.4 0.02 0.2 R 1/8, 1/4 G46-10-01 to 02-L 0 to 1.0 0.05 0.5 Note 1) Do not apply pressure more than the maximum display pressure. This will cause a malfunction. Model (Made to Order) (1) Pressure range Green zone setting range Indication Connection Model Note MPa psi Minimum setting range (MPa (psi)) Maximum setting range (MPa (psi)) unit thread G36-P2-01-L -X30 0 to 0.2 0 to 30 0.01 (2) 0.1 (14) G36-P4-01-L -X30 0 to 0.4 0 to 60 0.02 (4) 0.2 (28) R 1/8 G36-P10-01-L -X30 0 to 1.0 0 to 150 0.05 (10) 0.5 (70) MPa, psi G46-P2-01 to 02-L -X30 0 to 0.2 0 to 30 0.01 (2) 0.1 (14) G46-P4-01 to 02-L -X30 R 1/8, 1/4 0 to 0.4 0 to 60 0.02 (4) 0.2 (28) G46-P10-01 to 02-L -X30 0 to 1.0 0 to 150 0.05 (10) 0.5 (70) Note 1) Do not apply pressure more than the maximum display pressure. This will cause a malfunction. 652P0644-P0676-E.qxd 08.8.27 6:14 PM Page 653 Pressure Gauge with Limit Indicator/ Color Zone Type Series G36-L/G46-L How to Order G36 10 01 L Size Made to Order Outside Symbol Symbol Specifications diameter 36 37.5 Nil 46 42.5 X30 Both MPa and psi Max. display pressure Symbol Unit G Clear cover material 2 0.2 MPa Symbol Material 4 0.4 MPa GS Nil Polycarbonate 10 1.0 MPa Nylon N Note) P2 0.2 MPa, 30 psi PPA Note) P4 0.4 MPa, 60 psi Note) P10 1.0 MPa, 150 psi Color zone type Note) This symbol must be used with Option X30. Thread port size Applicable size Port Symbol G36 G46 01 R 1/8 02 R 1/4 Dimensions G36 41.5 Green zone Red zone 24.5 R 1/8 Red zone Clear cover Polycarbonate part no.: G36-00-00-3 Nylon part no.: G36-00-00-3N G46 41.5 (45.5) Green zone Red zone 25.5 R 1/8 (R 1/4) Red zone Clear cover Polycarbonate part no.: G46-00-00-3 Nylon part no.: G46-00-00-3N ( ): R 1/4 653 42.5 37.5 12 ( 14) 12