S-00-U-1.3-G D/C W/FLNG Smiths Interconnect

M23 Stainless Steel Series L & Series S Environmentally Sealed Circular ConnectorsM23 Stainless Steel M23 Stainless Steel Hypertac Hyperboloid Technology Smiths Interconnect offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac (HYPERboloid conTACT) is the original superior performing hyperboloid contact technology designed for use in all applications and in harsh and demanding environments where high reliability and safety are critical. The inherent electrical and mechanical characteristics of the Hypertac hyperboloid contact ensures unrivalled performance in terms of reliability, number of mating cycles, low contact force and minimal contact resistance. The shape of the contact sleeve is formed by hyperbolically arranged contact wires, which align themselves elastically as contact lines around the pin, providing a number of linear contact paths. Features Benefits Low insertion/extraction forces High density interconnect systems The angle of the socket wires allows tight control of the Significant reductions in size and weight of sub-system designs. pin insertion and extraction forces. The spring wires are No additional hardware is required to overcome mating and smoothly deflected to make line contact with the pin. un-mating forces. Long contact life Low cost of ownership The smooth and light wiping action minimizes wear on the contact The Hypertac contact technology will surpass most product surfaces. Contacts perform up to 100,000 insertion/extraction requirements, thus eliminating the burden and cost of having to cycles with minimal degradation in performance. replace the connector or the entire subsystem. Lower contact resistance Low power consumption The design provides a far greater contact area and the wiping The lower contact resistance of our technology results in a action of the wires insures a clean and polished contact lower voltage drop across the connector reducing the power surface. Our contact technology has about half the resistance of consumption and heat generation within the system. conventional contact designs. Higher current ratings Maximum contact performance The design parameters of the contact (e.g., the number, diameter and angle of the wires) may be modified for any requirement. The lower contact resistance of the Hypertac contact reduces heat The number of wires can be increased so the contact area is build-up therefore Hypertac contacts are able to handle far greater distributed over a larger surface. Thus, the high current carried by current in smaller contact assemblies without the detrimental each wire because of its intimate line contact, can be multiplied effects of high temperature. many times. Immunity to shock & vibration Reliability under harsh environments The low mass and resultant low inertia of the wires enable them Harsh environmental conditions require connectors that will to follow the most abrupt or extreme excursions of the pin without sustain their electrical integrity even under the most demanding loss of contact. The contact area extends 360 around the pin and conditions such as shock and vibration. The Hypertac contact is uniform over its entire length. The 3 dimensional symmetry of provides unmatched stability in demanding environments when the Hypertac contact design guarantees electrical continuity in all failure is not an option. circumstances. 2 3