SONG CHUAN SONG CHUAN 812H 215H Features New generation sugar cube relay for application. NO terminal with double pin type are available. High insulation with barrier type are available. CTI 250 material or product comply with IEC60335-1 are available. Complies with RoHS-Directive 2011/65/EU. Type List High Power Type Designation (provided with) Terminal Contact Insulation style form system Flux tight 1A(SPNO) F 215H-1AH-F-C PCB terminal 1C(SPDT) F 215H-1CH-F-C High Power & High Temperature Type Designation (provided with) Terminal Contact Insulation style form system Flux tight PCB terminal 1A(SPNO) F 215HT-1AC-F-C Ordering Information 215H - - F - C 1 2 3 4 5 6 7 8 1. 215H -- High power type 4.C -- Contact material AgNi H -- Contact material AgSnO 215BH -- High power type with insulation barrier 215HT -- High power & 5.F -- Class F High temperature type 215BHT -- High power & High temperature type with insulation barrier 6. C -- Flux tight V -- Sealed type 2.Blank -- Standard type A -- Double pin type 7. -- Standard type Blank E1 -- Comply with IEC 60335-1 3.1A -- Single pole normally open 1C -- Single pole double throw -- Coil voltage (please refer to the 8. coil rating data for the availability) Contact Rating Type 215H 215HT () NO: 10A 250VAC, 12A 120VAC NO: 17A 250VAC , Rated load (Resistive) () () NC: 8A 250VAC , 10A 120VAC 10A 250VAC, at 105C, 200K ops. Max. switching current 17A 20A Max. switching voltage 277VAC 277VAC Max. switching capacity 2500VA 4250VA All specifications subject to change. Please contact Song Chuan for update. 51SONG CHUAN SONG CHUAN 215H 215H Coil Rating (DC) Power Rated Rated current Coil resistance Max. continuous Pick up Drop out consumption voltage 10 % at 23C 10 % at 23C voltage voltage(Max.) voltage(Min.) at rated voltage (V) (mA) () at 85C at 23C at 23C 3 133 22.5 5 80 62.5 6 66.7 90 9 44.4 202.5 130 % of 75 % of 10 % of 12 33.3 360 approx. 0.4W rated rated rated voltage voltage voltage 15 26.7 562 18 22.2 811 24 16.7 1,440 36 11.1 3,240 48 8.3 5,760 Specification Contact material AgSnO / AgNi alloy (1) Contact resistance 100m Max. (at 1A/6VDC by 4-wire resistance measurement) (1) Operate time 15ms Max. (1) Release time 5ms Max. Operating extremes 10 50Hz , amplitude 1.0 mm Vibration resistance Damage limits 1050Hz , amplitude 1.0 mm Operating extremes 10G Shock resistance Damage limits 100G 10,000,000 ops. Mechanical (frequency 18,000 ops./hr) Life expectancy 100,000 ops. (frequency 360 ops./hr) Resistive load ( ) 50,000 ops. (frequency 360 ops./hr) -40+85C (no freezing) (for 215H) Operating ambient temperature -40+105C (no freezing) (for 215HT) Weight Approx. 10 g Note(1) Initial value. Operate and release time excluding contact bounce. (2) Unless otherwise specified, all tests are under room temperature and humidity. (3) Consider the heat of PCB is necessary, please check the actual condition of PCB. (4) Applying no diode to this relay. The life expectancy will be lower when a diode is used. To use a varistor (ZNR) could absorb the coil surge of relay that is recommended. (5) Do not use the relay exceeding the coil rating, contact rating and life expectancy, or this may cause the risk of overheating. (6) To assure optimum performance, avoid the relay from dropping, hitting, or other unnecessary shocks. (7) Do not switch the contacts without any load as the contact resistance may become increased rapidly. (8) Flux tight version is recommended. If there is cleaning process and sealed type is selected, the vent-hole should be removed after the process. 52