DEV-14011 SparkFun

APT3216QWF/D 3.2 mm x 1.6 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 3.2 mm x 1.6 mm SMD LED, 0.75 mm thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant APPLICATIONS Backlight RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 APT3216QWF/D White (InGaN) Yellow Fluorescent 120 250 160 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAI2506 / 1203001960 Rev No: V.12B Date: 09/29/2021 APT3216QWF/D ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Chromaticity Coordinates x 1 x White 0.31 - - I = 20mA F Chromaticity Coordinates y 1 y White 0.31 - - I = 20mA F Capacitance C White 100 - pF 2 Forward Voltage I = 20mA V White 3.3 4.0 V F F Reverse Current (V = 5V) I White - 50 A R R Notes: 1. Measurement tolerance of the chromaticity coordinates is 0.01. 2. Forward voltage: 0.1V. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 120 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 mA F 1 Peak Forward Current I 150 mA FM Electrostatic Discharge Threshold (HBM) 250 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAI2506 / 1203001960 Rev No: V.12B Date: 09/29/2021