MP1-L-0500-203-5%-RH Spectra Symbol

Features - Contactless Linear Sensor - IP64 Debris Proof, Splash Proof - Ideal for Hydraulic and Pneumatic Position Sensing - Liquid Level Capability - Upon request - Male or Female Nicomatic Connectors - Corresponding Exterior Magnet Mechanical Specifications Electrical Specifications -Life Cycle: >1 million -Resistance - Standard: 10k Ohms -Height: 3.50mm (0.138 ) (lengths >300mm = 20k Ohms) -Actuation Force: 18 grams pull force from -Resistance - Custom: 5k to 500k Ohms exterior magnet or ferromagnet -Resistance Tolerance: 20% -Effective Electrical Travel: 8 to 1200mm -Resolution: Depends on the exterior magnet strength and distance to the MagnetoPot -Power Rating: 0.50 Watt continuous, 1 Watt Peak -Dielectric Value: No affect 500VAC for 1 Environmental Specifications minute -Operating Temperature: up to +85C -Independant Linearity: 5% (1% available) -IP Rating of Active Area: IP64 -Hysteresis: 3mm* *Please note that the hysteresis is directly affected by the drive magnet size, strength, and distance from the internal magnet. Dimensional Diagram - Stock Linear MagnetoPots PART LENGTH P 10.16 0.400 ACTIVE LENGTH A TAIL WIDTH PIN 1 20.32 0.800 8.24 0.325 3.81 0.150 TAIL LENGTH T ACTIVE WIDTH 7.93 0.312 12.50mm 25.00mm 50.00mm 100.00mm 150.00mm 171.89mm 200.00mm 300.00mm 400.00mm 500.00mm 750.00mm 1000.00mm A 0.492 0.984 1.969 3.937 5.906 6.768 7.874 11.811 15.748 19.685 29.528 39.370 28.36mm 40.86mm 65.86mm 115.86mm 165.86mm 185.86mm 215.86mm 315.86mm 415.86mm 515.86mm 765.86mm 1015.86mm P 1.117 1.609 2.593 4.562 6.531 7.318 8.499 12.436 16.373 20.310 30.153 39.995 12.70mm 24.89mm T 0.500 0.980 spectrasymbol.com Rev I - Page 1 (888) 795-2283Electrical SchematicElectrical Schematic Material Cross-Section PIN 3 (GND) (LEFT BUS BAR) 3.28 0.129 CIRCUIT 10K PIN 2 (V+) (RIGHT BUS BAR) 0.05 0.002 3M ADHESIVE PIN 1 3.33 0.131 TOTAL (10%) (COLLECTOR) How to Order - MagnetoPots MP1 L 0050 103 5% ST Series Model Active Length Resistance Connectors 0012 = 12,5mm Active Lengths < 300mm ST = Solder Tab MP1 = MagnetoPot L = Linear 0025 = 25mm 103 = 10 KOhm MP = Male Pins 0050 = 50mm Active Lengths > 300mm RH = Receptacles w/Plain Housing 0100 = 100mm RL = Receptacles w/Latch* Housing 203 = 20 KOhm 0150 = 150mm RD = Receptacles w/Detent* Housing 0172 = 172mm * Please note that the RL and RD style 0200 = 200mm connectors are only available with the latch 0300 = 300mm Ind. Linearity or detent downward. 0400 = 400mm 5% = 5% 0500 = 500mm 0750 = 750mm 1000 = 1000mm Standard Connector Options Crimpflex Solder Tab (ST) Crimpflex Short Male Pins (MP) Crimpflex Female Receptacles with a Plain Housing (RH) Crimpflex Female Receptacles with a Latch Housing (RL) *only available with the latch oriented downward Crimpflex Female Receptacles with a Detent Housing (RD) *only available with the detent oriented downward spectrasymbol.com Page 2 (888) 795-2283