TSP-L-0050-103-3%-ST Spectra Symbol

TSP ThinPot Features - Linear Position Sensor - Half the width of the SoftPot - IP64 Dust Proof, Splash Proof - Polyester Substrate - 3M Pressure Sensitive Adhesive (PSA) SoftPot - Upon Request - Male or Female Nicomatic or Berg Connectors - Wiper of 0.7-2.2 Newton Force to Actuate Part Mechanical Specifications Electrical Specifications -Life Cycle: >1 million -Resistance - Standard: 10k Ohms -Height: 0.51mm (0.020 ) (lengths >300mm = 20k Ohms) -Actuation Force (with a 6mm wide active cavity): -Resistance - Custom: 1k to 100k Ohms -40C 0.9 to 2.2 N -Resistance Tolerance: 20% -25C 0.9 to 2.2 N -Effective Electrical Travel: 8 to 2000mm +23C 0.7 to 1.8 N -Linearity (Independent): Linear 1% or 3% +50C 0.7 to 1.8 N Rotary 3% or 5% -Repeatability: No hysteresis, but with any wiper looseness some hysteresis will occur Environmental Specifications -Power Rating (depending on size, varies with -Operating Temperature: -40C to +50C length and temperature): 1 Watt max. 25C, -Humidity: No affect 95% RH, 4hrs 50C 0.5 Watt recommended -IP Rating of Active Area: IP64 -Resolution: Analog output theoretically infinite affected by variation of contact wiper surface area. -Dielectric Value: No affect 500VAC for 1 minute Dimensional Diagram - Stock Linear ThinPot TAIL LENGTH T PART LENGTH P ACTIVE LENGTH A 3.17 0.125 6.00 0.236 2 PLCS ACTIVE WIDTH 10.00 0.394 2.00 0.079 2 PLCS 12.50mm 25.00mm 50.00mm 100.00mm 150.00mm 170.00mm 200.00mm 300.00mm 400.00mm 500.00mm 750.00mm 1000.00mm A 0.492 0.984 1.969 3.937 5.906 6.693 7.874 11.811 15.748 19.685 29.528 39.370 18.85mm 31.35mm 56.35mm 106.35mm 156.35mm 176.35mm 206.35mm 306.35mm 406.35mm 506.35mm 756.35mm 1006.35mm P 0.742 1.234 2.219 4.187 6.156 6.943 8.124 12.061 15.998 19.935 29.778 39.620 12.70mm 25.00mm T 0.500 0.984 spectrasymbol.com Rev A1 - Page 1 (888) 795-2283Electrical Schematic Material Cross-Section PIN 3 (GND) (LEFT BUS BAR) 0.41 0.016 CIRCUIT PIN 2 (COLLECTOR) 0.05 0.002 3M 200MP ADHESIVE PIN 1 (V+) 0.46 0.018 TOTAL THICKNESS (RIGHT BUS BAR) 10K or 20K How to Order - Linear ThinPots TSP L 0050 103 3% ST Series Model Active Length Resistance Connectors 0012 = 12,5mm ST = Solder Tab Active Lengths < 300mm TSP = ThinPot L = Linear 0025 = 25mm MP = Male Pins 103 = 10 KOhm 0050 = 50mm RH = Receptacles w/Plain Housing Active Lengths > 300mm 0100 = 100mm RL = Receptacles w/Latch Housing 203 = 20 KOhm 0150 = 150mm RD = Receptacles w/Detent Housing 0170 = 170mm B = FCI/Berg Clincher 0200 = 200mm 0300 = 300mm Ind. Linearity 0400 = 400mm 0500 = 500mm 1% = 1% 0750 = 750mm 3% = 3% 1000 = 1000mm Standard Connector Options Crimpflex Solder Tab (ST) Crimpflex Short Male Pins (MP) Crimpflex Female Receptacles with a Plain Housing (RH) Crimpflex Female Receptacles with a Latch Housing (RL) Crimpflex Female Receptacles with a Detent Housing (RD) FCI/Berg Clincher (B) spectrasymbol.com Page 2 (888) 795-2283