X-On Electronics has gained recognition as a prominent supplier of 701900 Emulators/Simulators across the USA, India, Europe, Australia, and various other global locations. 701900 Emulators/Simulators are a product manufactured by Spectrum Digital. We provide cost-effective solutions for Emulators/Simulators, ensuring timely deliveries around the world.
We are delighted to provide the 701900 from our Emulators/Simulators category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the 701900 and other electronic components in the Emulators/Simulators category and beyond.
XDS510 USB JTAG Emulator Set-up Instructions The XDS510 USB contains: XDS510 USB Driver CD ROM USB Cable Recommended System Hardware and Software Requirements 500MB of RAM SVGA (1024 x 768) color display These operating platform requirements are necessary to 2GHz. or faster Pentium or compatible install the Code Composer Studio (CCS) integrated Development Environment and support the XDS510-USB Supported Operating System CCS 3.x emulator. The requirements for the operating platform are: Windows 2000 Service Pack 4 Minimum Configuration Windows XP Pro Service Pack 1&2 500 MHz. or faster Pentium or compatible Windows XP Home Service Pack 1&2 600MB of free hard disk space SVGA (640x480) color display Supported Operating System CCS 2.2x Local CD-ROM Drive Same as CCS 3.x, plus Windows 98SE/ME (not recommended) 506186-4001B Page 1 of 4 12502 Exchange Dr., Ste 440, Stafford, TX. 77477 T:281.494.4505, F:281.494.5310 www.spectrumdigital.com Note: For Windows 2000 and XP you must install Code 4. Plug the XDS510-USB emulator into the other end of Composer Studio using Administrator privileges. To run CCS on the supplied USB cable. Windows will recognize a these systems requires write permission on the registry. new USB device and pop-up the new hardware found wizard. Follow the instructions and let Windows find The install CD contains emulation drivers for both CCS 2.2x and the USB drivers located on the install CD CCS 3.1x environments along with legacy driver support, (sdusbem.sys and sd510u2.inf). If properly installed SDFlash algos for C2000, and assorted manuals. To install any of Windows will create a new device class named SD the legacy support you must browse the CD and install by USB Based Debug Tools. The XDS510-USB device selecting the appropriate install program. will show up as a Spectrum Digital XDS510 USB The CCS 2.2x and CCS 3.1x driver install supports all Spectrum under this class. You can view this information under Digital emulators. Emulation drivers are updated on a regular Windows Device Manager. basis so check the Spectrum Digital web site at support.spectrumdigital.com. Setting Up Code Composer 1. Select the Code Composer Setup icon from the Installing Emulation Drivers desktop. 1. Insert the installation CD into the CD-ROM Drive. An 2. From CC Setup you can either import a new install screen should appear if not, go to Windows configuration or select from an existing one. From the Explorer and run launch.exe from the CD-ROM. filters pane select the platform xds510usb. This will give you a list of predefined configurations for the XDS510USB emulator. If one of these configurations does not exactly match your target then select the closet configuration. You can then modify this configuration to meet your needs. Setup between CCS 2.2x and 3.x has changed dramatically so see your CCStudio docs for more details. 3. If you want to change the configuration of your setup simply right mouse click on the configuration under System Configuration then select Properties. You can modify the individual properties for your setup. The I/O Port under Board Properties should be set to 0x510 for the XDS510-USB emulator. 4. Save your configuration and exit CC Setup. Running Code Composer You can now start Code Composer by double-clicking on the appropriate CCS icon. When CCS starts the XDS510- USB application loader will download the emulation driver application. Once the emulation application is loaded, the XDS510-USB emulator will enumerate and CCS will start. 2. Select the CCStudio product version and then the If there is a problem during the load or enumerate phase processor of interest. For CCS 2.2x drivers you have then the loader app will display an error/status message. the choice of C2000, C6000 and OMAP(C54/C55/ARM). For CCS 3.1x platinum there If you are running CCS 3.1, once CCS has started select is only one choice and it includes all processors in Debug->Connect from the menu bar. Target one install. When installing emulation drivers the Connect/Disconnect is a new feature in CCS 3.1, for default install should be changed to same directory as more details go to your CCS online help. you targeted CCStudio install. For CCS 2.2x this is normally c: ti and for CCS 3.1x this is normally c: CCStudio v3.1. 3. Plug the supplied USB cable into an available port on your PC or HUB. Use of a USB HUB is recommended as it provides added isolation between your debug environment and PC. 506186-4001B Page 2 of 4 12502 Exchange Dr., Ste 440, Stafford, TX. 77477 T:281.494.4505, F:281.494.5310 www.spectrumdigital.com
Calling all new customers! Register now with Xon Electronics and save 5%, up to 50$, on your first order! Don't miss out – this offer won't last forever!
Discount Code : XONFIRSTUSER
