199D www.vishay.com Vishay Sprague Solid-Electrolyte TANTALEX Capacitors, Resin-Coated, Radial-Lead FEATURES Terminations: tin / lead (SnPb), 100 % tin (Sn) Economy and high performance are combined Available in these radial-lead, solid-electrolyte TANTALEX capacitors Available Rugged, reliable capacitors featuring low leakage current and low dissipation factor Six miniature case sizes and five lead styles. All case sizes are available in standard tape and reel packaging per EIA-468 Standard ratings include replacements for type 196D capacitors Lead (Pb)-free capacitors have L in body marking Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. APPLICATIONS Suitable for a broad range of consumer, commercial and industrial equipment PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C Life Test: capacitors shall withstand rated DC voltage (to +125 C with voltage derating) applied at +85 C for 1000 h with a circuit resistance not greater than 3 . Capacitance Tolerance: at 120 Hz, +25 C, 20 %, 10 % standard. 5 % available as special Following the life test: Dissipation Factor: at 120 Hz, +25 C. Dissipation factor, 1. DCL shall not exceed 125 % of the initial requirements shall not exceed the values listed in the Standard Ratings 2. Dissipation factor shall meet the initial requirement tables. 3. Change in capacitance shall not exceed 10 % DC Leakage Current (DCL Max.): at +25 C: leakage current shall not exceed the values listed in the Standard Ratings tables. at +85 C: leakage current shall not exceed 10 times the values listed in the Standard Ratings tables. at +125 C: leakage shall not exceed 15 times the values listed in the Standard Ratings tables. ORDERING INFORMATION (1) 199D 475 X9 003 A 1 V1 E3 MODEL CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE LEAD PACKAGING RoHS TOLERANCE AT +85 C CODE STYLE COMPLIANT This is expressed in X0 = 20 % This is expressed in V. See V1 = Bulk E3 = 100 % picofarads. The first X9 = 10 % To complete the Ratings B1 = Tape and reel tin termination two digits are the ** X5 = 5 % three-digit block, zeros and A1 = Ammo (RoHS compliant) significant figures. ** Special Order precede the voltage Case Blank = Tin / lead The third is the rating. A decimal point Codes termination number of zeros to is indicated by an R table. follow. (6R3 = 6.3 V). Note (1) See lead styles table. Revision: 04-Jan-17 Document Number: 40020 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 199D www.vishay.com Vishay Sprague LEAD STYLE CONFIGURATIONS AND DIMENSIONS** (LL = Lead Length) EVEN LL OUTSIDE HOCKEYSTICK SNAP-IN HAIRPIN X, Z LONG/SHORT LL 1, 3 and Y 2, 4 and 5 6 and 7 9 6.35 max. D D D D D + + + + H H H H 1 + + + + H H 1 1.1 0.05 L L L L L P P P P P (1) - WIRE DIAMETER (NOMINAL) 0.020 0.51 mm AVAILABLE LEAD STYLES AND PACKAGING TYPES PER CASE SIZE LEAD STYLE / CASE 1 2 3 4 5679 X Y Z A Bulk Bulk Bulk Bulk Bulk Bulk V1 V1 V1 V1 V1 V1 B Bulk Bulk Reel Reel Reel Reel Reel Bulk Reel V1 V1 B1 B1 B1 B1 B1 V1 B1 C Reel Ammo Ammo Ammo Ammo Ammo Ammo B1 A1 A1 A1 A1 A1 A1 D Ammo A1 E Bulk Bulk / Reel V1 Ammo F DIMENSIONS in inches millimeters LEAD STYLE 1, 2, 3, 4 1, 2, 3 2, 4 5, Y 6 P L P L P D H L H 1 CASE 0.024 0.118 0.03 0.118 0.024 L max. max. min. max. 0.60 3.0 0.76 3.0 0.60 0.173 0.280 0.378 A 4.40 7.11 9.61 0.197 0.300 0.398 B 5.00 7.62 10.12 0.100 0.125 0.748 0.240 0.030 2.54 3.18 19.0 6.1 0.76 0.217 0.360 0.458 C 5.50 9.14 11.64 0.591 0.748 0.200 15.0 19.0 5.08 0.236 0.400 0.498 D 6.00 10.16 12.66 0.339 0.492 0.591 E -- 8.60 12.50 15.00 0.200 1 0.122 5.08 25.4 3.1 0.378 0.650 0.748 F -- 9.60 16.50 19.00 Revision: 04-Jan-17 Document Number: 40020 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 3 1