Flashers and Tower Lighting Controls
Flashers
FS200 SERIES
Description
The FS200 Series may be used to control inductive,
incandescent, or resistive loads. Factory fixed flash rate of 45
or 90 FPM or may be ordered with a fixed custom flash rate
ranging from 10 to 180 FPM. Encapsulation provides protection
against shock, vibration, and humidity. Uniform performance,
high inrush current capability, and low RFI, make this series ideal
for general industrial applications.
Operation
Upon application of input voltage, the T2 OFF time begins. At
the end of the OFF time, the T1 ON time begins and the load
energizes. At the end of T1, T2 begins and the load de-energizes.
This cycle repeats until input voltage is removed.
Reset: Removing input voltage resets the output and the
sequence to T2.
Features & Benefits
Wiring Diagram FEATURES BENEFITS
3A steady, 30A inrush, Provides direct control of inductive, incandescent, or
SPST output contact resistive loads
No moving parts to arc and wear out over time and
Totally solid state
encapsulated to protect against shock, vibration,
and encapsulated
and humidity
High inrush current
V = Voltage
Ideal for general industrial applications
capability and low RFI
L = Load
Accessories
P1023-6 Mounting bracket
The 90 orientation of mounting slots makes
installation/removal of modules quick and easy.
P1015-64 (AWG 14/16)
Female Quick Connect
These 0.25 in. (6.35 mm) female terminals are
constructed with an insulator barrel to provide
strain relief.
P1015-18 Quick Connect to Screw Adapter
Ordering Information
Screw adapter terminal designed for use with
MODEL INPUT RATING FLASH RATE
all modules with 0.25 in. (6.35 mm) male quick
connect terminals.
FS219-45 12VDC 20% 3A 45 FPM
C103PM (AL) DIN Rail
FS224 24VDC 20% 3A 90 FPM
35 mm aluminum DIN rail available in a 36 in.
If you dont find the part you need, call us for a custom product 800-843-8848
(91.4 cm) length.
P1023-20 DIN Rail Adapter
Allows module to be mounted on a 35 mm DIN
type rail with two #10 screws.
Specifications
2016 Littelfuse Protection Relays & Controls Rev: 1-A-062316
www.littelfuse.com/fs200Flashers and Tower Lighting Controls
Flashers
FS200 SERIES
Specifications Flasher Function Diagram
Technical Data
V = Voltage
Operation OFF/ON solid-state flasher (continuous duty) FLASHER (OFF FIRST)
R = Reset
Flash Rate Fixed at 90 FPM 10%
L = Load
Custom Flash Rate 10 - 180 FPM
T1 = ON Time
ON/OFF Ratio 50%
T2 = OFF Time
Input
T1 T2
Voltage 12, 24, 36, 48, or 110VDC
Output
Load Type Inductive, resistive, or incandescent
Maximum Load Rating 0.25 - 3A steady state
OFF State Leakage Current
12 & 24VDC 250 A
Inrush 10 times steady state current
Mechanical
Mounting Surface mount with one #10 (M5 x 0.8) screw
Dimensions H 50.8 mm (2); W 50.8 mm (2);
D 30.7 mm (1.21)
Termination 0.25 in. (6.35 mm) male quick connect terminals
Protection
Circuitry Encapsulated
Environmental
Operating/Storage
Temperature -20 to 60C / -40 to 85C
Weight 2.2 oz (62 g)
2016 Littelfuse Protection Relays & Controls Rev: 1-A-062316
www.littelfuse.com/fs200