RMCF0603FT49K9 Stackpole

RMC F/RMCP Series Stackpole Electronics, Inc. General Purpose Thick Film Standard Power Resistive Product Solutions and High Power Chip Resistor RMCF standard power ratings Features: RMCP high power ratings Nickel barrier terminations standard Power derating from 100% at 70C to zero at +155C RMCF package sizes 0402 through 2512 are qualified to AEC-Q200 RoHS compliant Electrical Specifications (2) Maximum Resistance Ohmic Range () and Tolerance Power Rating Maximum Maximum Type / Code Working Temperature (Watts) 70C Overload Voltage Current (1) 1% 5% Voltage Coefficient -200/+600 ppm/C 1 - 9.76 RMCF01005 0.03W 15V 30V 0.5 Amp 250 ppm/C 10 - 1M 400 ppm/C 1 - 9.76 RMCF0201 0.05W 25V 50V 1 Amp 200 ppm/C 10 - 10M 300 ppm/C 0.2 - 0.59 200 ppm/C 0.604 - 9.76 RMCF0402 0.063W 50V 100V 1 Amp 100 ppm/C 10 - 1M 200 ppm/C 1.02M - 10M 1.1M - 20M 600 ppm/C 0.1 - 0.976 200 ppm/C 1 - 9.76 1 - 20M RMCF0603 0.1W 75V 150V 1 Amp 100 ppm/C 10 - 1M - 200 ppm/C 1.02M - 10M - 200 ppm/C 1 - 9.76 1 - 20M RMCF0805 0.125W 150V 300V 2 Amp 100 ppm/C 10 - 1M - 200 ppm/C 1.02M - 10M - 200 ppm/C 1 - 9.76 1 - 20M RMCF1206 0.25W 200V 400V 2 Amp 100 ppm/C 10 - 1M - 200 ppm/C 1.02M - 10M - 200 ppm/C 0.1 - 0.976 (3) 400 ppm/C 1 - 9.76 RMCF1210 0.33W 200V 400V 3 Amp 200 ppm/C - 10 - 20M 100 ppm/C 10 - 10M - 200 ppm/C 0.1 - 0.976 400 ppm/C 1 - 9.76 RMCF2010 0.75W 200V 400V 3 Amp 200 ppm/C - 10 - 10M 100 ppm/C 10 - 10M - 200 ppm/C 0.1 - 0.976 400 ppm/C 1 - 9.76 RMCF2512 1W 200V 400V 3 Amp 200 ppm/C - 10 - 10M 100 ppm/C 10 - 10M - RMCP0402 0.125W 50V 100V 1 Amp RMCP0603 0.25W 75V 150V 1 Amp RMCP0805 0.33W 150V 300V 2 Amp 200 ppm/C 1 - 9.76 RMCP1206 0.33W 200V 400V 2 Amp 100 ppm/C 10 - 1M RMCP1210 0.5W 200V 400V 3 Amp RMCP2010 1W 200V 400V 3 Amp RMCP2512 2W 250V 500V 3 Amp Notes: (1) Lesser of PR or maximum working voltage. (2) Contact factory for extended ohmic values. (3) Power rating is 0.5W for ohmic values below 1K Rev Date: 09/11/2015 1 www.seielect.com This specification may be changed at any time without prior notice marketing seielect.com Please confirm technical specifications before you order and/or use. Downloaded from Arrow.com. RMC F/RMCP Series Stackpole Electronics, Inc. General Purpose Thick Film Standard Power Resistive Product Solutions and High Power Chip Resistor Mechanical Specifications Average Unit L W H a b Type / Code Unit Weight (mg) Body Length Body Width Body Height Top Termination Bottom 0.016 0.001 0.008 0.001 0.005 0.001 0.004 0.001 0.004 0.001 inches RMCF01005 0.07 0.40 0.02 0.20 0.02 0.13 0.02 0.10 0.03 0.10 0.03 mm 0.024 0.001 0.012 0.001 0.009 0.0004 0.006 0.002 0.006 0.002 inches RMCF0201 0.16 0.60 0.03 0.30 0.03 0.23 0.01 0.15 0.05 0.15 0.05 mm RMCF0402 0.57 0.039 0.004 0.020 0.002 0.012 0.004 0.008 0.004 0.010 0.006 inches RMCP0402 0.62 1.00 0.10 0.50 0.05 0.30 0.10 0.20 0.10 0.25 0.15 mm RMCF0603 1.88 0.061 0.006 0.031 + 0.006 0.018 0.004 0.012 0.008 0.012 0.008 inches 1.55 0.15 0.80 + 0.15 0.45 0.10 0.30 0.20 0.30 0.20 mm RMCP0603 2.04 RMCF0805 5.00 0.079 0.008 0.049 0.004 0.020 0.006 0.014 0.010 0.014 0.010 inches RMCP0805 4.37 2.00 0.20 1.25 0.10 0.50 0.15 0.35 0.25 0.35 0.25 mm RMCF1206 8.86 0.126 0.010 0.063 0.006 0.022 0.006 0.020 0.012 0.020 0.012 inches 3.20 0.25 1.60 0.15 0.55 0.15 0.50 0.30 0.50 0.30 mm RMCP1206 8.95 RMCF1210 15.55 0.126 0.010 0.098 0.010 0.022 0.006 0.020 0.012 0.020 0.012 inches RMCP1210 15.96 3.20 0.25 2.50 0.25 0.55 0.15 0.50 0.30 0.50 0.30 mm RMCF2010 23.56 0.197 0.008 0.098 0.008 0.022 0.006 0.024 0.012 0.024 0.014 inches RMCP2010 24.24 5.00 0.20 2.50 0.20 0.55 0.15 0.60 0.30 0.60 0.35 mm RMCF2512 40.02 0.248 0.008 0.126 0.010 0.022 0.006 0.024 0.012 0.024 0.014 inches 6.30 0.20 3.20 0.25 0.55 0.15 0.60 0.30 0.60 0.35 mm RMCP2512 39.45 Performance Characteristics Test Test Conditions (JIS C 5202) Test Results Short Time Overload 2.5x rated voltage for 5 seconds (2% + 0.1) Dielectric Withstanding Voltage 100 VAC, 1 minute (1% + 0.05) Resistance to Soldering Heat 260C 5C, for 10 sec. 0.5 sec. (Solder Bath) 1% Solderability 235C 5C, for 2 sec. 0.5 sec. (Colophonium flux) 95% coverage, minimum -65C: 30 min. 25C: 2 to 3 min. (1% + 0.05) Temperature Cycle 155C: 30 min. 25C: 2 to 3 min. Jumper (<0.05) (5 Cycles) 40C 2C, 90% RH, Rated Load (3% + 0.1) Endurance (Damp load) 90 min. On, 30 min. Off for 1,000 hrs. -0hrs./+48hrs. Jumper (<0.05) 70C 2C, Rated Load (3% + 0.1) Endurance (Rated load) 90 min. On, 30 min. Off for 1,000 hrs. -0hrs./+48hrs. Jumper (<0.05) Voltage Coefficient 1/10 rated voltage for 3 sec. max. then rated voltage for 3 sec. max. 100 (ppm/V) Robustness of Termination Bend of 3mm for 5 1 sec. (1% + 0.05 Ohm) Operating Temperature Range: -55C to +125C (0201 size) -55C to +155C (all others) Rev Date: 09/11/2015 2 www.seielect.com This specification may be changed at any time without prior notice marketing seielect.com Please confirm technical specifications before you order and/or use. Downloaded fromDownloaded from Arrow.com.Arrow.com.