FPS-L Standexmeder

DRAWING NUMBER REV. BOM FOR PACKAGE WIRE: 6 FEET FSC 5002U 3 ITEM QTY. SENSOR 1 ADJUSTMENT NUT 2 MARKING LOCATION BRACKET 1 ADJUSTMENT NUT NOTES: DRAIN PAN BRACKET 1. FLOAT MATERIAL: POLYPROPYLENE, WHITE 2. HOUSING AND RETAINER RING MATERIAL: POLYPROPYLENE, BLACK 3. BRACKET MATERIAL: 22 GA, 304 2B STAINLESS STEEL ADJUSTMENT NUT 4. O-RING MATERIAL: SILICONE 5. OPERATING TEMPERATURES UP TO 70C 6. STORAGE TEMPERATURE UP TO 105C 7. ELECTRICAL CHARACTERISTICS: 1.13" - POWER RATING (MAX) 50VA SENSOR - SWITCHING VOLTAGE (MAX) 200 VDC, 150 VAC - BREAKDOWN VOLTAGE (MIN) 250VDC - CONTACT ARRANGEMENT SPST MARKING - SWICHING CURRENT (MAX) 1.5 A DC, 1.5 A AC - CARRY CURRENT (MAX) 2.5 A DC, 2.5 A AC DETAIL - CONTACT RESISTANCE 100 m 1.02" - INSULATION RESISTANCE (MIN) 10  - SWITCH AGENCY LISTED UL E122752 8. WIRE CONNECTIONS: 18AWG UL1007/1569 OR UL2468 9. FLOAT SPECIFIC GRAVITY: 0.75 (REFERENCE ONLY) 10. PLASTIC MATERIAL REGULATORY COMPLIANCE: FDA, RoHS, UL 2.18" 11. CONFORMS TO UL508 12. MUST PASS MINUMUM OF 30 LBS. WIRE PULL TEST USING DEAD WEIGHT FOR ONE MINUTE WATER LEVEL @ INSTALLATION INSTRUCTIONS SENSOR ACTIVATION * SLIDE BRACKET CLIP OVER SIDE OF PAN .56" .09 * SECURE BRACKET WITH TAPE AS NEEDED * ADJUST THREAD POSITION TO SET SENSOR ACTIVATION HEIGHT O .80" * REMOVE SENSOR TO CLEAN & INSPECT This drawing and the information and technical data contained hereon, are confidential and proprietary to Standex Electronics and shall not be used in whole or in part without Standex written consent TOLERANCES TITLE When Unspecified FPS-B Inches Millimeters + .01 + Standex 2 Place Dec. - 1 Place Dec. - CINCINNATI a Standex company OHIO .005 Electronics + + 3 Place Dec. 2 Place Dec. - - DATE DRAWING NUMBER REV. + + 1 Fractions - Angles - Dwn. CCR 4/2/2012 FSC 5002U 3 Scale : App'd. N/A DCJ 4/3/2012 REVISIONS 1 INITIAL RELEASE 4/3/12 DCJ 2 ADD INSTALLATION INSTRUCTIONS; ADD WATER LEVEL; ADD DIMENSIONS 10/25/12 DCJ 3 ADD MARKING DETAIL VIEW 1/8/13 DCJ