LS02-1A66-PA-500W Standexmeder

A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet LS02 Level Sensors LS02 Series Level Sensors Features: IP68-only up to Screw in Thread, High Power Switch Option, Other Cables & Connectors Applications: Level Control, Detection and Monitoring Markets: Automotive, Appliance, HVAC/R, Test & Measurement Part-Description: LS -02 0 X00 -XX -000 X Cable Cable Length Contact QTY Contact Form Switch Model Material (mm) Termination A (SPST-NO) 500, 1,000, W = Stripped 01 66, 85 PA, PP B (SPST-NC) 5,000 and Tinned Customer Options Switch Model Unit 66 85 Contact Data Rated Power (max.) 10 100 W Any DC combination of V&A not to exceed their individual max.s Switching Voltage (max.) 200 400 V DC or peak AC Switching Current (max.) 0.5 1.0 A DC or peak AC Carry Current (max.) 1.25 2.5 A DC or peak AC Contact Resistance (max.) 150 150 mOhm 0.5V & 10mA Glossary Material Glossary Contact Form For water applications NO = Normally Open Contacts PP: Polypropylene Form A and dilute acids SPST = Single Pole Single Throw PA: Polyamide For oil NC = Normally Closed Contacts Form B NBR: Nitrile For oil, gasoline & in SPST = Single Pole Single Throw Butadiene Rubber high temperatures Changeover Form C SS: Stainless Steel For high temp. (< 160 C) SPDT = Single Pole Double Throw USA: +1.866.782.6339 salesusa standexmeder.com Version 01 Europe: +49.7731.8399.0 info standexmeder.com 27.01.2015 Asia: +86.21.37820625 salesasia standexmeder.com Modifications in the sense of technical progress are reserved. A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet LS02 Level Sensors General Sensor Data LS02 Level Sensor Materials Stem, nut PA PP Float PA PP NBR Seal Nitrile Rubber Low voltage High voltage Cable spec (Switch Model 66) (Switch Model 85) Cross Section (mm) 0,14 0,25 Cable material PVC Packing Bulk Environmental Data Unit Life Test Data Shock Resistance (max.) *Load increase reduces life expectancy of Reed Switches 50 G 1/2 sine wave duration 11ms Vibration Resistance (max.) 20 G Operating Temperature -30 to 80 C Cable not moved Operating Temperature -5 to 80 C Cable moved Storage Temperature -30 to 80 C Handling & Assembly Instructions Max torque of screw is 1Nm Cable bending-radius is diameter x 15 Min. bending distance to housing is 5mm Drag mark out of the mounting area forbidden Decrease switching distance by mounting on iron Series resistor recommended for > 5m cable length USA: +1.866.782.6339 salesusa standexmeder.com Version 01 Europe: +49.7731.8399.0 info standexmeder.com 27.01.2015 Asia: +86.21.37820625 salesasia standexmeder.com Modifications in the sense of technical progress are reserved.