A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components Series Datasheet SIL HV Reed Relays www.standexmeder.com SIL HV Series Reed Relays Features: Small size High Voltage Relay, High Insulation Voltage up to 4 KVDC Applications: Portable Test and Medical Equipment, Defibrillators, Cable and In-Circuit Tester & Others Markets: Medical, Test and Measurement & Others Part Description: SIL 00 - 1 A85 -78 X 0 K Nominal Contact Switch Breakdown Contact QTY Pin Out Option Voltage Form Model Voltage 05, 12, 24 1 A 85 78 D, L 3K, 4K Switch Model Customer Options Unit Contact Data 85 Rated Power (max.) 100 W Any DC combination of V&A not to exceed their individual max.s Switching Voltage (max.) 1,000 V DC or peak AC Switching Current (max.) 1.0 A DC or peak AC Carry Current (max.) 2.5 A DC or peak AC Contact Resistance (max.) 150 mOhm 0.5V & 50mA Breakdown Voltage (min.) 2 / 3 / 4 kVDC According to EN60255-5 Operating Time (max.) 1.1 ms Incl. Bounce Measured with w/ Nominal Voltage Release Time (max.) 0.1 ms Measured with no Coil Excitation Insulation Resistance (typ.) 11 10 Ohm Rh<45%, 100V Test Voltage Capacitance (typ.) 0.5 pF 10kHz across open Switch USA: +1.866.782.6339 salesusa standexmeder.com Version 01 Europe: +49.7731.8399.0 info standexmeder.com 27.01.2015 Asia: +86.21.37820625 salesasia standexmeder.com D. Stastny Modifications in the sense of technical progress are reserved. A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components Series Datasheet SIL HV Reed Relays www.standexmeder.com Coil Data Coil Voltage Coil Resistance Pull-In Voltage Drop-Out Voltage Nominal Coil Power Contact Switch (nom.) (typ.) (max.) (min.) (typ.) Form Model Unit VDC Ohm VDC VDC mW 05 180 3.75 0.5 139 85 3k 12 500 8.4 1.8 288 1A 05 140 3.75 0.5 179 85 4k 12 500 8.4 1.8 288 The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per C. Environmental Data Unit SIL HV Reed Relay Shock Resistance (max.) 50 g 1/2 sine wave duration 11ms Vibration Resistance (max.) 20 g Operating Temperature -20 to 70 C Storage Temperature -35 to 95 C Soldering Temperature (max.) 260 C 5 sec. max. Handling & Assembly Instructions Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used. Life Test Data External magnetic fields needs to be taken into *Load increase reduces life expectancy of Reed Switches consideration, including a too high packing density. This may influence the relays electrical characteristics. Mechanical shock impacts e.g. dropping the relays may cause immediate or post-installation failure. Wave soldering: maximum 260/5 seconds. Reflow soldering: Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. Glossary Contact Form NO = Normally Open Contacts Form A SPST = Single Pole Single Throw NC = Normally Closed Contacts Form B SPST = Single Pole Single Throw Changeover Form C SPDT = Single Pole Double Throw USA: +1.866.782.6339 salesusa standexmeder.com Version 01 Europe: +49.7731.8399.0 info standexmeder.com 27.01.2015 Asia: +86.21.37820625 salesasia standexmeder.com D. Stastny Modifications in the sense of technical progress are reserved.