TECHNICAL DATA SHEET STANNOL SOLDER WIRE HF32 Designed for use in electronics application DESCRIPTION Solder wire HF32 has been developed to meet industries increasingly stringent quality requirements. It is a flux cored solder wire. The activated, halide-free flux meets DIN EN 29454 type 1.1.3 and IEC 61190-1-3 type ROL0 standard. The flux residues are solid and dry, and are not corrosive when tested in accordance with DIN 8516. APPLICATION HF32 can be used for hand-soldering and automatic wire feed operations. For manual soldering, the soldering iron tips should be temperature-controlled, to prevent excessive heat from being applied to the wire. Flux spatter from the formulation is fairly low. Solder wire HF32 meets the requirements of DIN 8516, with respect to surface insulation resistance and electromigration. The flux residues are not corrosive to non-ferrous metals. If cleaning is necessary for optical or technical reasons, we recommend the use of the cleaner Stannol Flux-Ex 200B or Stannol Flux-Ex 500. PHYSICAL PROPERTIES AND DATA GENERAL PROPERTIES SOLDER WIRE HF32 Flux type: ROL0 (IEC 61190-1-3) / 1.1.3.B (DIN EN 29454-1) / F-SW32 Flux content: standard 3,5 weight % 0,3 % Halide content: none, according to DIN EN ISO 9455-6 Corrosion effect: none, according to DIN EN 29455-5 und -15 10 Surface Insulation Resistance: 85/85% r.H. 7 d >10 Lead-containing: Lead-free (Ecoloy Serie) S-Sn60Pb40 Ecoloy TC (S-Sn99Cu1) Standard alloys acc. to ISO 9453:2006 S-Sn60Pb39Cu1 Ecoloy TSC (S-Sn95Ag4Cu1) S-Sn62Pb36Ag2 Ecoloy TSC305 (S-Sn96Ag3Cu1) Available diameters: from 0,3 mm Available reel size: 250 g, 500 g, 1 kg Other alloys, diameters flux contents or reel sizes are available on request. HEALTH AND SAFETY Before using please read the material safety data sheet carefully and observe the safety precautions described. NOTICE The above values are typical and represent no form of specification. The Data Sheet serves for information purposes. Any verbal or written advise is not binding for the company, whether such information originates from the company offices or from a sales representative. This is also in respect of any protection rights of third parties, and does not release the customer from the responsibility of verifying the products of the company for suitability of use for the intended process or purpose. Should any liability on the part of the company arise, the company will only indemnify for loss or damage to the same extent as for defects in quality. STANNOL GmbH TDB LD HF32 EN Issue: 21.08.14 1 Haberstr. 24 42551 Velbert Tel: +49 (0)2051-3120-0 Fax: +49 (0)2051-3120-111 E-Mail: info stannol.de www.stannol.de X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder category: Click to view products by Stannol manufacturer: Other Similar products are found below : 91362-6 14600 24-6040-0007 24-7150-8800 24-9574-7619 24-4060-2437 04-0595-0000 9SN-310G 5901006 8001111 ECC179707EU 49500-454G SMDLTLFP250T5 41-096-0201N ART.AGT-030 8001263 8001265 MPT2NY.IT MPT2SV.IT 0008752 04-6040-0050 580140 H560103-BULK H560106-BULK TDS12AS 5601380 BON-102F BON-102K BON-102S BR-102F 560006BA 560017A 560048 560051 560069W-LF 5601034 5601053 5601056 5601058 5601129 5601157 5601161 5601166 5601167 5601170 8001092 5601213 5601243 0401-08-000179 5601247 0401-08-000183 5601275