DOORMOUSE WALL MOUNTED ELECTROMAGNETIC FIRE DOOR HOLDERS INNOVATORS OF FIRE TECHNOLOGY 24Vdc OR 230Vac SUPPLY VOLTAGE ZERO RESIDUAL FORCE 200N - 500N HOLDING FORCE FIRE RESISTANT ABS CASING APPROVED TO EN1155 AND CE MARKED HIGH QUALITY COST EFFECTIVE PACKAGE INCLUDES FITTING INSTRUCTIONS UL LISTED VERSION AVAILABLE FILE R25547 Electromagnetic fire door holders are designed to hold open fire doors in any areas where easy access is essential in relation to the Equality Act, and can be used in conjunction with any suitable fire alarm systems. When an alarm is triggered, power to the door holder is cut, allowing the fire door fitted with its standard closing mechanism, to shut automatically. Doormouse door holders are fitted with an integral manual release button, allowing the door to be closed without operating the fire alarm. The Doormouse door holder is surface mounted, and is housed in a white fire resistant ABS casing. Type tested to meet EN1155, knockouts for surface or back cable entry, and a spring loaded pin to give zero residual holding force when de-energised. The 230Vac unit includes a filter for EMC emissions and is CE marked. Internal diodes dissipate any back EMF on switch- off, reducing wear at the control unit. The Doormouse is ideal for use in any public access areas including hospitals, offices, hotels and nursing homes. Stephenson Gobin 20 Longfield Road, South Church Enterprise Park, Bishop Auckland, County Durham, UK, DL14 6XB Tel: +44 (0)1388 770 360 Fax: +44 (0)1388 779 197 INNOVATORS OF FIRE TECHNOLOGY Email: enquiries geofire.co.uk Web: www.geofire.co.uk Geofire reserve the right to change the specifications in this data sheet without prior notificationDOORMOUSE - WALL MOUNTED ELECTROMAGNETIC FIRE DOOR HOLDERS TECHNICAL INFORMATION Supply voltage 24Vdc or 230V ac Holding force 200N or 500N Power rating 1.15W Residual holding force Zero Ambient temperature 0 - 40C Protection IP 51 Casing White fire-resnt ABS Weight 360g / 500g Part numbers 200N : 3-87-0370 (24Vdc) 3-87-0371(230Vac) 3-87-0351 (UL - 24V) 3-87-0352 (UL - 230V) 500N : 3-87-0551 (24Vdc) Item Name Part number Accessories Doormouse F.M. bracket 2-34-035G-S001 Each Doormouse is supplied with an adjustable Chain keeper 2-31-0308-Z082 keeper plate as standard. All other accessories should be sold separately. The Doormouse chain keeper plate can be used where the Keeper Plates Holding Force Adjustment Part number standard keeper plate will not reach the door Low profile 200N 15 2-31-0307-N237 holder due to the door being positioned further Adjustable 200N 30 2-31-0310-U005 towards the centre of the wall. Adjustable 500N 30 2-31-0507-Z001 Low profile 500N 15 2-31-0507-Z011 DOORMOUSE ASSEMBLY