AEK-CON-5SLOTS1 STMicroelectronics

AEK-CON-5SLOTS1 Data brief 5-slot AutoDevKit connector board Features Fast and easy extension of 4x37 connector on SPC5x discovery boards Single female connector to plug the board onto an SPC5x 4x37 connector Two male connectors with same outputs as 4x37 connector Two configurable male connectors 4x37 whose pins can be reassigned to connect different functional boards Additional ground and 5V pins Bare section available on the board for specific application purposes Female-to-female jump wire set included Part of the AutoDevKit initiative Description AutoDevKit allows you to save time an effort when prototyping concepts or designs for complex automotive applications by generating custom firmware code and pin- assignments across a suite of functional boards, using SPC5-Studio as your integrated development environment (IDE). The AEK-CON-5SLOTS1 interface board provides a set of 4x37 extension connectors that allow you to reconfigure the pin assignments for ADC, LIN, Timers, DSPI, GPIO, and other standard peripherals on the SPC5x Discovery control board connector for compatibility with AutoDevKit functional boards with different connector pin assignments. Product summary 5 slot AutoDevKit AEK-CON-5SLOTS1 connector board SPC5-Studio addon Development for Eclipse (with environment AutoDevKit plugin extension) DB3967 - Rev 1 - July 2019 www.st.com For further information contact your local STMicroelectronics sales office.AEK-CON-5SLOTS1 Overview 1 Overview Figure 1. AEK-CON-5SLOTS1 block diagram BOARD 1 BOARD 2 SPC5x discovery board BOARD 3 BOARD n The AEK-CON-5SLOTS1 features two groups of two 4x37 connectors that we nominate Group A and Group B in the figure below. To reconfigure a connector, connect jumper wires from the original pin location on the inner connector of Group A to new pin locations on the inner connector in Group B. Figure 2. AEK-CON-5SLOTS1 jumpers to reconfigure the SPC5x discovery board connector pin assignments Pins on inner 4x37 connector in Group A are routed to different pins on the connector in Group B The outer connector in Group B matches the pin allocation of the inner connector in the same group, so you can connect jumper wires between the outer connector and external connectors on a separate functional board according to the new pin allocations on the Group B connectors. DB3967 - Rev 1 page 2/6